[1] Kiessling F, Nefzger P, Kaintzyk U, Nolasco JF (2003) Overhead Power Lines. Planning, Design, Construction, Springer, Berlin, Heidelberg.
[2] Valiev RZ, Murashkin MYU, Sabirov IA (2014) A nanostructural design to produce high-strength Al alloys with enhanced electrical conductivity. Scr Mater 76:13-16. https://doi.org/10.1016/j.scriptamat.2013.12.002.
[3] Reinke G, Badibanga RK, Pestana MS, De Almeida Ferreira JL, Araujo JA, Moreira da Silva CR (2020) Failure analysis of aluminum wires in all aluminum alloy conductors-AAAC. Eng Fail Anal 107:104197. https://doi.org/10.1016/j.engfailanal.2019.104197.
[4] Murashkin MY, Sabirov I, Sauvage X, Valiev RZ (2016) Nanostructured Al and Cu alloys with superior strength and electrical conductivity. J Mater Sci 51:33–49. https://doi.org/10.1007/s10853-015-9354-9.
[5] Zhu YK, Chen QY, Wang Q, Yu HY, Li R, Hou JP, Zhang ZJ, Zhang GP, Zhang ZF (2018) Effect of stress profile on microstructure evolution of cold-drawn commercially pure aluminum wire analyzed by finite element simulation. J Mater Sci Technol 34:1214-1221. https://doi.org/10.1016/j.jmst.2017.07.011.
[6] Luo XM, Song ZM, Li ML, Wang Q, Zhang GP (2017) Microstructural evolution and service performance of cold-drawn pure aluminum conductor wires. J Mater Sci Technol 33:1039–1043. https://doi.org/10.1016/j.jmst.2016.11.018.
[7] Hou JP, Wang Q, Yang HJ, Wu XM, Li CH, Li XW, Zhang ZF (2015) Microstructure evolution and strengthening mechanisms of cold-drawn commercially pure aluminum wire. Mat Sci Eng A 639:103-106. https://doi.org/10.1016/j.msea.2015.04.102.
[8] Iwahashi Y, Horita Z, Nemoto M, Langdon TG (1998) The process of grain refinement in equal-channel angular pressing. Acta Mater 46:3317-3331. https://doi.org/10.1016/S1359-6454(97)00494-1.
[9] Chakkingal U, Suriadi AB, Thomson PF (1998) Microstructure development during equal channel angular drawing of Al at room temperature. Scr Mater 39:677-684. https://doi.org/10.1016/S1359-6462(98)00234-6.
[10] Chen X, Huang G-S, Liu S-S, Han T-Z, Jiang B, Tang A-T, Zhu Y-T, Pan F-S (2019) Grain refinement and mechanical properties of pure aluminum processed by accumulative extrusion bonding. Trans Nonferrous Met Soc China 29:437-447. https://doi.org/10.1016/S1003-6326(19)64953-8.
[11] Zisman AA, Rybin VV, Van Boxel S, Seefeldt M, Verlinden B (2006) Equal channel angular drawing of aluminium sheet. Mat Sci Eng A 427:123-129. https://doi.org/10.1016/j.msea.2006.04.007.
[12] Hall EO (1951) The deformation and aging of mild steel: III discussion of results. Proc Phys Soc B 64:747. https://doi.org/10.1088/0370-1301/64/9/303.
[13] Petch NJ (1953) The cleavage strength of polycrystals. J Iron Steel Inst 174:25-28.
[14] Saito Y, Utsunomiya H, Tsuji N, Sakai T (1999) Novel ultra-high straining process for bulk materials—development of the accumulative roll-bonding (ARB) process. Acta Mater 47:579-583. https://doi.org/10.1016/S1359-6454(98)00365-6.
[15] Hanazaki K, Shigeiri N, Tsuji N (2010) Change in microstructures and mechanical properties during deep wire drawing of copper. Mat Sci Eng A 527:5699-5707. https://doi.org/10.1016/j.msea.2010.05.057.
[16] Hansen N (2004) Hall-Petch relation and boundary strengthening. Scr Mater 51:801–806. https://doi.org/10.1016/j.scriptamat.2004.06.002.
[17] Koizumi T, Kuroda M (2018) Grain size effects in aluminum processed by severe plastic deformation. Mat Sci Eng A 710:300-308. https://doi.org/10.1016/j.msea.2017.10.077.
[18] Barlat F, Glazov MV, Brem JC, Lege DJ (2002) A simple model for dislocation behavior, strain and strain rate hardening evolution in deforming aluminum alloys. Int J Plast 18:919-939. https://doi.org/10.1016/S0749-6419(01)00015-8.
[19] Bagherzadeh S, Abrinia K (2015) Effect of ultrasonic vibration on compression behavior and microstructural characteristics of commercially pure aluminum. J Mater Eng Perform 24:4364-4376. https://doi.org/10.1007/s11665-015-1730-8.
[20] Tanaka K, Nakai Y, Yamashita M (1981) Fatigue growth threshold of small cracks. Int J Fract 17:519-533. https://doi.org/10.1007/BF00033345.
[21] Doherty RD, Hughes DA, Humphreys FJ, Jonas JJ, Jensen DJ, Kassner ME, King WE, McNelley TR, McQueen HJ, Rollett AD (1997) Current issues in recrystallization: a review. Mat Sci Eng A 238:219-274. https://doi.org/10.1016/S0921-5093(97)00424-3.
[22] Humphreys FJ, Hatherly M (2004) Recrystallization and related annealing phenomena, 2nd ed. New York: Pergamon.
[23] Valiev RZ, Islamgaliev RK, Alexandrov IV (2000) Bulk nanostructured materials from severe plastic deformation. Prog Mater Sci 45:103-189. https://doi.org/10.1016/S0079-6425(99)00007-9.
[24] Valiev RZ (1996) Ultrafine-grained materials prepared by severe plastic deformation. Annales de Chimie Science des Materiaux Special Issue 21:369.
[25] Çetinarslan CS (2009) Effect of cold plastic deformation on electrical conductivity of various materials. Mater Des 30:671-673. https://doi.org/10.1016/j.matdes.2008.05.035.