[1] T. DebRoy, H.L. Wei, J.S. Zuback, T. Mukherjee, J.W. Elmer, J.O. Milewski, A.M. Beese, A. Wilson-Heid, A. De, W. Zhang, Additive manufacturing of metallic components – Process, structure and properties, Prog. Mater. Sci. 92 (2018) 112–224. https://doi.org/10.1016/j.pmatsci.2017.10.001.
[2] D.B. Miracle, Metal matrix composites - From science to technological significance, Compos. Sci. Technol. 65 (2005) 2526–2540. https://doi.org/10.1016/j.compscitech.2005.05.027.
[3] A. Aramian, S.M.J. Razavi, Z. Sadeghian, F. Berto, A review of additive manufacturing of cermets, Addit. Manuf. 33 (2020) 101130. https://doi.org/10.1016/j.addma.2020.101130.
[4] V.M. Fomin, A.A. Golyshev, V.F. Kosarev, A.G. Malikov, A.M. Orishich, N.S. Ryashin, A.A. Filippov, V.S. Shikalov, Creation of heterogeneous materials on the basis of B4C and Ni powders by the method of cold spraying with subsequent layer-by-layer laser treatment, J. Appl. Mech. Tech. Phys. 58 (2017) 947–955. https://doi.org/10.1134/S0021894417050224.
[5] P. Krakhmalev, I. Yadroitsev, Microstructure and properties of intermetallic composite coatings fabricated by selective laser melting of Ti-SiC powder mixtures, Intermetallics. 46 (2014) 147–155. https://doi.org/10.1016/j.intermet.2013.11.012.
[6] C. Hong, D. Gu, D. Dai, M. Alkhayat, W. Urban, P. Yuan, S. Cao, A. Gasser, A. Weisheit, I. Kelbassa, M. Zhong, R. Poprawe, Laser additive manufacturing of ultrafine TiC particle reinforced Inconel 625 based composite parts: Tailored microstructures and enhanced performance, Mater. Sci. Eng. A. 635 (2015) 118–128. https://doi.org/10.1016/j.msea.2015.03.043.
[7] S. Pouzet, P. Peyre, C. Gorny, O. Castelnau, T. Baudin, F. Brisset, C. Colin, P. Gadaud, Additive layer manufacturing of titanium matrix composites using the direct metal deposition laser process, Mater. Sci. Eng. A. 677 (2016) 171–181. https://doi.org/10.1016/J.MSEA.2016.09.002.
[8] C. Cai, B. Song, C. Qiu, L. Li, P. Xue, Q. Wei, J. Zhou, H. Nan, H. Chen, Y. Shi, Hot isostatic pressing of in-situ TiB/Ti-6Al-4V composites with novel reinforcement architecture, enhanced hardness and elevated tribological properties, J. Alloys Compd. 710 (2017) 364–374. https://doi.org/10.1016/j.jallcom.2017.03.160.
[9] K.S. Ravi Chandran, K.B. Panda, S.S. Sahay, TiBw-reinforced Ti composites: Processing, properties, application prospects, and research needs, JOM. 56 (2004) 42–48. https://doi.org/10.1007/s11837-004-0127-1.
[10] A.M. Vilardell, G. Fredriksson, I. Yadroitsev, P. Krakhmalev, Fracture mechanisms in the as-built and stress-relieved laser powder bed fusion Ti6Al4V ELI alloy, Opt. Laser Technol. 109 (2019) 608–615. https://doi.org/10.1016/j.optlastec.2018.08.042.
[11] M. Tang, L. Zhang, N. Zhang, Microstructural Evolution, Mechanical and Tribological Properties of TiC/Ti6Al4V Composites with Unique Microstructure Prepared by SLM, Mater. Sci. Eng. A. 814 (2021) 141187. https://doi.org/10.1016/j.msea.2021.141187.
[12] R. Chen, H. Fang, X. Chen, Y. Su, H. Ding, J. Guo, H. Fu, Formation of TiC/Ti 2 AlC and α 2 +γ in in-situ TiAl composites with different solidification paths, Intermetallics. 81 (2017) 9–15. https://doi.org/10.1016/j.intermet.2017.02.025.
[13] M. Yi, X. Zhang, G. Liu, B. Wang, H. Shao, G. Qiao, Comparative investigation on microstructures and mechanical properties of (TiB + TiC)/Ti-6Al-4V composites from Ti-B4C-C and Ti-TiB2-TiC systems, Mater. Charact. 140 (2018) 281–289. https://doi.org/10.1016/j.matchar.2018.04.010.
[14] T.W. Lee, C.H. Lee, Microstructure and mechanical properties of TiB2/TiAl composites produced by reactive sintering using a powder extrusion technique, J. Mater. Sci. Lett. 18 (1999) 801–803. https://doi.org/10.1023/A:1006645302032.
[15] S. Li, K. Kondoh, H. Imai, B. Chen, L. Jia, J. Umeda, Y. Fu, Strengthening behavior of in situ -synthesized (TiC–TiB)/Ti composites by powder metallurgy and hot extrusion, Mater. Des. 95 (2016) 127–132. https://doi.org/10.1016/j.matdes.2016.01.092.
[16] S. Bhowmick, G. Sun, A.T. Alpas, Low friction behaviour of boron carbide coatings (B4C) sliding against Ti–6Al–4V, Surf. Coatings Technol. 308 (2016) 316–327. https://doi.org/10.1016/j.surfcoat.2016.05.092.
[17] Y. Zhao, T. Yu, J. Sun, S. Jiang, Microstructure and properties of laser cladded B4C/TiC/Ni-based composite coating, Int. J. Refract. Met. Hard Mater. 86 (2020) 105112. https://doi.org/10.1016/j.ijrmhm.2019.105112.
[18] B. Du, S.R. Paital, N.B. Dahotre, Phase constituents and microstructure of laser synthesized TiB2–TiC reinforced composite coating on steel, Scr. Mater. 59 (2008) 1147–1150. https://doi.org/10.1016/j.scriptamat.2008.07.035.
[19] J. Li, Z. Yu, H. Wang, M. Li, Microstructural characterization of titanium matrix composite coatings reinforced by in situ synthesized TiB + TiC fabricated on Ti6Al4V by laser cladding, Rare Met. 29 (2010) 465–472. https://doi.org/10.1007/s12598-010-0151-y.
[20] L.L. Bai, J. Li, J.L. Chen, R. Song, J.Z. Shao, C.C. Qu, Effect of the content of B4C on microstructural evolution and wear behaviors of the laser-clad coatings fabricated on Ti6Al4V, Opt. Laser Technol. 76 (2016) 33–45. https://doi.org/10.1016/j.optlastec.2015.07.010.
[21] J. Li, Z. Yu, H. Wang, M. Li, Microstructural evolution of titanium matrix composite coatings reinforced by in situ synthesized TiB and TiC by laser cladding, Int. J. Miner. Metall. Mater. 17 (2010) 481–488. https://doi.org/10.1007/s12613-010-0345-1.
[22] B.. Kooi, Y.. Pei, J.T.. De Hosson, The evolution of microstructure in a laser clad TiB–Ti composite coating, Acta Mater. 51 (2003) 831–845. https://doi.org/10.1016/S1359-6454(02)00475-5.
[23] M.S.K.K.Y. Nartu, S.A. Mantri, M. V. Pantawane, Y.-H. Ho, B. McWilliams, K. Cho, N.B. Dahotre, R. Banerjee, In situ reactions during direct laser deposition of Ti-B4C composites, Scr. Mater. 183 (2020) 28–32. https://doi.org/10.1016/j.scriptamat.2020.03.021.
[24] M. Xia, A. Liu, Z. Hou, N. Li, Z. Chen, H. Ding, Microstructure growth behavior and its evolution mechanism during laser additive manufacture of in-situ reinforced (TiB+TiC)/Ti composite, J. Alloys Compd. 728 (2017) 436–444. https://doi.org/10.1016/j.jallcom.2017.09.033.
[25] D. Tijo, M. Masanta, Mechanical performance of in-situ TiC-TiB2 composite coating deposited on Ti-6Al-4V alloy by powder suspension electro-discharge coating process, Surf. Coatings Technol. 328 (2017) 192–203. https://doi.org/10.1016/J.SURFCOAT.2017.08.048.
[26] D. Tijo, M. Masanta, A.K. Das, In-situ TiC-TiB2 coating on Ti-6Al-4V alloy by tungsten inert gas (TIG) cladding method: Part-I. Microstructure evolution, Surf. Coatings Technol. 344 (2018) 541–552. https://doi.org/10.1016/J.SURFCOAT.2018.03.082.
[27] Q. An, L. Huang, S. Jiang, X. Li, Y. Gao, Y. Liu, L. Geng, Microstructure evolution and mechanical properties of TIG cladded TiB reinforced composite coating on Ti-6Al-4V alloy, Vacuum. 145 (2017) 312–319. https://doi.org/10.1016/J.VACUUM.2017.09.019.
[28] D. Tijo, M. Masanta, Effect of Ti/B4C ratio on the microstructure and mechanical characteristics of TIG cladded TiC-TiB2 coating on Ti-6Al-4V alloy, J. Mater. Process. Technol. 266 (2019) 184–197. https://doi.org/10.1016/j.jmatprotec.2018.11.005.
[29] J. Liu, Z. Liu, An experimental study on synthesizing TiC–TiB2–Ni composite coating using electro-thermal explosion ultra-high speed spraying method, Mater. Lett. 64 (2010) 684–687. https://doi.org/10.1016/j.matlet.2009.12.038.
[30] D. Ravnikar, N.B. Dahotre, J. Grum, Laser coating of aluminum alloy EN AW 6082-T651 with TiB2 and TiC: Microstructure and mechanical properties, Appl. Surf. Sci. 282 (2013) 914–922. https://doi.org/10.1016/j.apsusc.2013.06.089.
[31] Y. Diao, K. Zhang, Microstructure and corrosion resistance of TC2 Ti alloy by laser cladding with Ti/TiC/TiB 2 powders, Appl. Surf. Sci. 352 (2015) 163–168. https://doi.org/10.1016/j.apsusc.2015.04.030.
[32] R. Wang, D. Gu, C. Chen, D. Dai, C. Ma, H. Zhang, Formation mechanisms of TiB2 tracks on Ti6Al4V alloy during selective laser melting of ceramic-metal multi-material, Powder Technol. 367 (2020) 597–607. https://doi.org/10.1016/j.powtec.2020.04.027.
[33] Q.W. Meng, L. Geng, B.Y. Zhang, Laser cladding of Ni-base composite coatings onto Ti-6Al-4V substrates with pre-placed B4C + NiCrBSi powders, Surf. Coatings Technol. 200 (2006) 4923–4928. https://doi.org/10.1016/j.surfcoat.2005.04.059.
[34] Y. LEI, Z. WANG, X. CHEN, Effect of arc-ultrasound on microstructures and mechanical properties of plasma arc welded joints of SiCp/Al MMCs, Trans. Nonferrous Met. Soc. China. 21 (2011) 272–277. https://doi.org/10.1016/S1003-6326(11)60709-7.
[35] L. He, M. Wu, L. Li, H. Hao, Ultrasonic generation by exciting electric arc: A tool for grain refinement in welding process, Appl. Phys. Lett. 89 (2006) 131504. https://doi.org/10.1063/1.2357857.
[36] W.-L. Dai, Effects of high-intensity ultrasonic-wave emission on the weldability of aluminum alloy 7075-T6, Mater. Lett. 57 (2003) 2447–2454. https://doi.org/10.1016/S0167-577X(02)01262-4.
[37] L. Qingmei, Z. Yong, S. Yaoling, Q. Feipeng, Z. Qijie, Influence of ultrasonic vibration on mechanical properties and microstructure of 1Cr18Ni9Ti stainless steel, Mater. Des. 28 (2007) 1949–1952. https://doi.org/10.1016/j.matdes.2006.04.025.
[38] W. Wu, Influence of vibration frequency on solidification of weldments, Scr. Mater. 42 (2000) 661–665. https://doi.org/10.1016/S1359-6462(99)00416-9.
[39] Z. Xu, J. Yan, G. Wu, X. Kong, S. Yang, Interface structure of ultrasonic vibration aided interaction between Zn–Al alloy and Al2O3p/6061Al composite, Compos. Sci. Technol. 65 (2005) 1959–1963. https://doi.org/10.1016/j.compscitech.2005.02.004.
[40] S. Kumar, C.S. Wu, G.K. Padhy, W. Ding, Application of ultrasonic vibrations in welding and metal processing: A status review, J. Manuf. Process. 26 (2017) 295–322. https://doi.org/10.1016/j.jmapro.2017.02.027.
[41] T. Chmielewski, D.A. Golański, New method of in-situ fabrication of protective coatings based on Fe–Al intermetallic compounds, Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 225 (2011) 611–616. https://doi.org/10.1177/2041297510394050.
[42] J. Piekoszewski, A. Krajewski, F. Prokert, J. Senkara, J. Stanisławski, L. Waliś, Z. Werner, W. Włosiński, Brazing of alumina ceramics modified by pulsed plasma beams combined with arc PVD treatment, Vacuum. 70 (2003) 307–312. https://doi.org/10.1016/S0042-207X(02)00660-7.
[43] G.Z. (Grigoriĭ Z. Gershuni, D.V. (Dmitriĭ V. Li︠u︡bimov, Thermal vibrational convection, John Wiley & Sons, 1998.
[44] M. Kawaji, R.Q. Liang, M. Nasr-Esfahany, S. Simic-Stefani, S. Yoda, The effect of small vibrations on Marangoni convection and the free surface of a liquid bridge, Acta Astronaut. 58 (2006) 622–632. https://doi.org/10.1016/j.actaastro.2006.03.002.
[45] S. Yang, R. Liang, F. Yan, T. Gao, Y. Feng, Thermocapillary Convection and Surface Fluctuation in a Liquid Bridge under Lateral Vibrations, Microgravity Sci. Technol. 27 (2015) 1–10. https://doi.org/10.1007/s12217-014-9407-8.
[46] A.N. Malov, A.M. Orishich, Ultimate energy characteristics of a mechanically Q-switched CO2 LASER, Tech. Phys. Lett. 40 (2014) 170–173. https://doi.org/10.1134/S1063785014020242.
[47] A.A. Golyshev, A.M. Orishich, A.A. Filippov, Similarity Laws in Laser Cladding of Cermet Coatings, J. Appl. Mech. Tech. Phys. 60 (2019) 758–767. https://doi.org/10.1134/S0021894419040217.
[48] A.I. Ancharov, A.Y. Manakov, N.A. Mezentsev, B.P. Tolochko, M.A. Sheromov, V.M. Tsukanov, New station at the 4th beamline of the VEPP-3 storage ring, Nucl. Instruments Methods Phys. Res. Sect. A Accel. Spectrometers, Detect. Assoc. Equip. 470 (2001) 80–83. https://doi.org/10.1016/S0168-9002(01)01029-4.
[49] A. Golyshev, A. Orishich, Microstructure and mechanical characterization of TI6AL4V-B4C metal ceramic alloy, produced by laser powder-bed fusion additive manufacturing, Int. J. Adv. Manuf. Technol. 109 (2020) 579–588. https://doi.org/10.1007/s00170-020-05509-1.