[1] Bell L E. Cooling, Heating, Generating Heat with and Recovering Waste Thermoelectric. Science 2008, 321: 1457–1461.
[2] Tan G, Zhao L D, Kanatzidis M G. Rationally Designing High-Performance Bulk Thermoelectric Materials. Chem Rev 2016, 116: 12123–12149.
[3] He J, Tritt T M. Advances in thermoelectric materials research: Looking back and moving forward. Science 2017, 357: 559-529.
[4] Biswas K, He J, Blum I D, et al. High-performance bulk thermoelectrics with all-scale hierarchical architectures. Nature 2012, 489: 414–418.
[5] Lu X, Zhang Q, Liao J, et al. High-Efficiency Thermoelectric Power Generation Enabled by Homogeneous Incorporation of MXene in (Bi, Sb)2Te3 Matrix. Adv Energy Mater 2020, 10: 156-165.
[6] Acharyya P, Roychowdhury S, Samanta M, et al. Ultralow Thermal Conductivity, Enhanced Mechanical Stability, and High Thermoelectric Performance in (GeTe)1-2 x(SnSe)x(SnS)x. J Am Chem Soc 2020, 142: 20502–20508.
[7] Bousnina M A, Giovannelli F, Perriere L, et al. Ba substitution for enhancement of the thermoelectric properties of LaCoO3 ceramics (0 ⩽ x ⩽ 0.75). J Adv Ceram 2019, 8: 519–526.
[8] Shi X, Ai X, Zhang Q, et al. Enhanced thermoelectric properties of hydrothermally synthesized n-type Se&Lu-codoped Bi2Te3. J Adv Ceram 2020, 9: 424–431.
[9] Hanus R, Agne M T, Rettie A J E, et al. Lattice Softening Significantly Reduces Thermal Conductivity and Leads to High Thermoelectric Efficiency. Adv Mater 2019, 31: 1–10.
[10] Tang C, Liang D, Li H, et al. Preparation and thermoelectric properties of Cu1.8S/CuSbS2 composites. J Adv Ceram 2019, 8: 209–217.
[11] Chen Z G, Shi X, Zhao L D, et al. High-performance SnSe thermoelectric materials: Progress and future challenge. Prog Mater Sci 2018, 97: 283–346.
[12] Zhao L D, Lo S H, Zhang Y, et al. Ultralow thermal conductivity and high thermoelectric figure of merit in SnSe crystals. Nature 2014, 508: 373–377.
[13] Chang C, Wu M, He D, et al. 3D charge and 2D phonon transports leading to high out-of-plane ZT in n-type SnSe crystals. Science 2018, 360: 778–783.
[14] Shi X L, Tao X, Zou J, et al. High-Performance Thermoelectric SnSe: Aqueous Synthesis, Innovations, and Challenges. Adv Sci 2020, 7: 25-29.
[15] Sassi S, Candolfi C, Vaney J B, et al. Assessment of the thermoelectric performance of polycrystalline p-type SnSe. Appl Phys Lett 2014, 104: 199-210.
[16] Ge Z H, Song D, Chong X, et al. Boosting the Thermoelectric Performance of (Na, K)-Codoped Polycrystalline SnSe by Synergistic Tailoring of the Band Structure and Atomic-Scale Defect Phonon Scattering. J Am Chem Soc 2017, 139: 9714–9720.
[17] Zhao L D, Tan G, Hao S, et al. Ultrahigh power factor and thermoelectric performance in hole-doped single-crystal SnSe. Science 2016, 351: 141–144.
[18] Wei W, Chang C, Yang T, et al. Achieving High Thermoelectric Figure of Merit in Polycrystalline SnSe via Introducing Sn Vacancies. J Am Chem Soc 2018, 140: 499–505.
[19] Huang X Q, Chen Y X, Yin M, et al. Origin of the enhancement in transport properties on polycrystalline SnSe with compositing two-dimensional material MoSe2. Nanotechnology 2017, 28: 189-195.
[20] Naguib M, Kurtoglu M, Presser V, et al. Two-dimensional nanocrystals produced by exfoliation of Ti3AlC2. Adv Mater 2011, 23: 4248–4253.
[21] Anasori B, Lukatskaya M R, Gogotsi Y. 2D metal carbides and nitrides (MXenes) for energy storage. Nat Rev Mater 2017, 2:152-159.
[22] Huang L, Lu J, Ma D, et al. Facile: In situ solution synthesis of SnSe/rGO nanocomposites with enhanced thermoelectric performance. J Mater Chem A 2020, 8: 1394–1402.
[23] Fu Z, Wang N, Legut D, et al. Rational Design of Flexible Two-Dimensional MXenes with Multiple Functionalities. Chem Rev 2019, 5: 125-158.
[24] Fan Y, Jiang W, Kawasaki A. Highly conductive few-layer graphene/Al2O3 nanocomposites with tunable charge carrier type. Adv Funct Mater 2012, 22: 3882–3889.
[25] Ghidiu M, Lukatskaya M R, Zhao M Q, et al. Conductive two-dimensional titanium carbide clay with high volumetric capacitance. Nature 2015, 516: 78–81.
[26] Li S, Wang Y, Chen C, et al. Heavy Doping by Bromine to Improve the Thermoelectric Properties of n-type Polycrystalline SnSe. Adv Sci 2018, 5: 6–11.
[27] Shi X, Wu A, Feng T, et al. High Thermoelectric Performance in p-type Polycrystalline Cd-doped SnSe Achieved by a Combination of Cation Vacancies and Localized Lattice Engineering. Adv Energy Mater 2019, 9: 1–15.
[28] Chandra S, Biswas K. Realization of High Thermoelectric Figure of Merit in Solution Synthesized 2D SnSe Nanoplates via Ge Alloying. J Am Chem Soc 2019, 141: 6141–6145.
[29] Shi G, Kioupakis E. Quasiparticle band structures and thermoelectric transport properties of p-type SnSe. J Appl Phys 2015, 117: 0–10.
[30] Chandra S, Banik A, Biswas K. N-Type Ultrathin Few-layer Nanosheets of Bi Doped SnSe: Synthesis and Thermoelectric Properties. ACS Energy Lett 2018, 3: 1153–1158.
[31] Wei P C, Bhattacharya S, Liu Y F, et al. Thermoelectric Figure-of-Merit of Fully Dense Single-Crystalline SnSe. ACS Omega 2019, 4: 5442–5450.
[32] Gholivand H, Fuladi S, Hemmat Z, et al. Effect of surface termination on the lattice thermal conductivity of monolayer Ti3C2Tz MXenes. J Appl Phys 2019, 126: 125-129.