[1] P. Rohatgi, “Cast aluminum-matrix composites for automotive applications,” Jom, vol. 43, no. 4, pp. 10–15, 1991.
[2] T. Garg, P. Mathur, V. Singhal, C. Jain, and P. Gupta, “Underwater Friction Stir Welding: An Overview,” International Review of Applied Engineering Research, vol. 4, no. 2, pp. 2248–9967, 2014.
[3] S. Kumar, V. Sharma, R. S. Panwar, and O. P. Pandey, “Wear behavior of dual particle size (DPS) zircon sand reinforced aluminum alloy,” Tribology Letters, vol. 47, no. 2, pp. 231–251, 2012.
[4] M. Maurya, S. Kumar, and V. Bajpai, “Assessment of the mechanical properties of aluminium metal matrix composite: A review,” Journal of Reinforced Plastics and Composites, vol. 38, no. 6, pp. 267–298, 2019.
[5] S. C. Tjong, Processing and Deformation Characteristics of Metals Reinforced with Ceramic Nanoparticles. 2013.
[6] J. J. Rino, D. Chandramohan, and V. D. Jebin, “RESEARCH REVIEW ON CORROSION BEHAVIOUR OF METAL MATRIX COMPOSITES.”
[7] N. Radhika and R. Raghu, “Abrasive wear behavior of monolithic alloy, homogeneous and functionally graded aluminum (LM25/AlN and LM25/SiO2) composites,” Particulate Science and Technology, vol. 37, no. 1, pp. 10–20, 2019.
[8] G. B. V. Kumar, R. Pramod, C. G. Sekhar, G. P. Kumar, and T. Bhanumurthy, “Investigation of physical, mechanical and tribological properties of Al6061–ZrO2 nano-composites,” Heliyon, vol. 5, no. 11, pp. 0–7, 2019.
[9] M. Singla, D. D. Dwivedi, L. Singh, and V. Chawla, “Development of Aluminium Based Silicon Carbide Particulate Metal Matrix Composite,” Journal of Minerals and Materials Characterization and Engineering, vol. 08, no. 06, pp. 455–467, 2015.
[10] A. Canakci and F. Arslan, “Abrasive wear behaviour of B4C particle reinforced Al2024 MMCs,” International Journal of Advanced Manufacturing Technology, vol. 63, no. 5–8, pp. 785–795, 2012.
[11] O. Yilmaz and S. Buytoz, “Abrasive wear of Al2O3-reinforced aluminium-based MMCs,” Composites Science and Technology, vol. 61, no. 16, pp. 2381–2392, 2001.
[12] M. O. Bodunrin, K. K. Alaneme, and L. H. Chown, “Aluminium matrix hybrid composites: A review of reinforcement philosophies; Mechanical, corrosion and tribological characteristics,” Journal of Materials Research and Technology, vol. 4, no. 4, pp. 434–445, 2015.
[13] H. Abdizadeh and M. A. Baghchesara, “Investigation into the mechanical properties and fracture behavior of A356 aluminum alloy-based ZrO2-particle-reinforced metal-matrix composites,” Mechanics of Composite Materials, vol. 49, no. 5, pp. 571–576, 2013.
[14] Zuhailawati H., P. Samayamutthirian, and Mohd Haizu C.H., “Fabrication of low cost of aluminium ,matrix composite reinforced with silica sand,” Journal of Physical Science, vol. 18, no. 1, pp. 47–55, 2007.
[15] R. Arora, S. Kumar, G. Singh, and O. P. Pandey, “Effect of applied pressure on the tribological behaviour of dual particle size rutile reinforced LM13 alloy composite,” in Characterization of Minerals, Metals, and Materials 2015, 2016, pp. 755–762.
[16] S. C. Sharma, “The sliding wear behavior of A16061-garnet particulate composites,” Wear, vol. 249, no. 12, pp. 1036–1045, 2001.
[17] S. Kumar, R. S. Panwar, and O. P. Pandey, “Tribological characteristics of aluminium tri-reinforced particles (Al- TRP) composites developed by liquid metallurgy route,” Advanced Materials Research, vol. 585, pp. 574–578, 2012.
[18] B. Vinod, S. Ramanathan, V. Ananthi, and N. Selvakumar, “Fabrication and characterization of organic and in-organic reinforced A356 Aluminium matrix hybrid composite by improved double-stir casting,” Silicon, vol. 11, no. 2, pp. 1–13, 2018.
[19] S. V Prasad and R. Asthana, “Aluminum metal – matrix composites for automotive applications : tribological considerations,” vol. 17, no. 3, 2004.
[20] S. Sharma, T. Nanda, and O. P. Pandey, “Effect of particle size on dry sliding wear behaviour of sillimanite reinforced aluminium matrix composites,” Ceramics International, vol. 44, no. 1, pp. 104–114, 2018.
[21] M. Singh, D. P. Mondal, A. K. Jha, S. Das, and A. H. Yegneswaran, “Preparation and properties of cast aluminium alloy--sillimanite particle composite,” Composites Part A: Applied Science and Manufacturing, vol. 32, no. 6, pp. 787–795, 2001.
[22] L. Rasidhar, A. R. Krishna, and C. S. Rao, “Fabrication and investigation on properties of Ilmenite (FeTiO3) based al-nanocomposite by stir casting process,” International Journal of Bio-Science and Bio-Technology, vol. 5, no. 4, pp. 193–199, 2013.
[23] A. Gupta, V. Singhal, and O. P. Pandey, “Facile in-situ synthesis of NbB 2 nanoparticles at low temperature,” Journal of Alloys and Compounds, vol. 736, pp. 306–313, 2018.
[24] M. Singh, D. P. Mondal, A. K. Jha, S. Das, and A. H. Yegneswaran, “Preparation and properties of cast aluminium alloy ± sillimanite particle composite,” vol. 32, pp. 787–795, 2001.
[25] R. Gupta, S. Sharma, T. Nanda, and O. P. Pandey, “Wear studies of hybrid AMCs reinforced with naturally occurring sillimanite and rutile ceramic particles for brake-rotor applications,” Ceramics International, vol. 46, no. 10, pp. 16849–16859, 2020.
[26] N. C. Kaushik and R. N. Rao, “Tribology International Effect of applied load and grit size on wear coef fi cients of Al 6082 – SiC – Gr hybrid composites under two body abrasion,” Tribiology International, vol. 103, pp. 298–308, 2016.
[27] S. Srivastava, S. Mohan, Y. Srivastava, and A. J. Shukla, “Study of the wear and friction behavior of immiscible as cast-Al- Sn / Graphite composite Abstract :,” International Journal of Modern Engineering Research, vol. 2, no. 2, pp. 25–42, 2012.
[28] E. Omrani, A. D. Moghadam, P. L. Menezes, and P. K. Rohatgi, “Influences of graphite reinforcement on the tribological properties of self-lubricating aluminum matrix composites for green tribology, sustainability, and energy efficiency—A review,” International Journal of Advanced Manufacturing Technology, vol. 83, no. 1–4, pp. 325–346, 2016.
[29] R. Tyagi, “Synthesis and tribological characterization of in situ cast Al-TiC composites,” Wear, vol. 259, no. 1–6, pp. 569–576, 2005.
[30] S. Das, S. V Prasad, and T. R. Ramachandran, “Microstructure and wear of cast (Al-Si alloy)-graphite composites,” Wear, vol. 133, pp. 173–187, 1989.
[31] S. Sharma, T. Nanda, and O. P. Pandey, “Effect of dual particle size (DPS) on dry sliding wear behaviour of LM30/sillimanite composites,” Tribology International, vol. 123, pp. 142–154, 2018.
[32] V. Sharma, S. Kumar, R. S. Panwar, and O. P. Pandey, “Microstructural and wear behavior of dual reinforced particle (DRP) aluminum alloy composite,” Journal of Materials Science, vol. 47, no. 18, pp. 6633–6646, 2012.
[33] V. Vijeesh and K. N. Prabhu, “Review of microstructure evolution in hypereutectic Al-Si alloys and its effect on wear properties,” Transactions of the Indian Institute of Metals, vol. 67, no. 1, pp. 1–18, 2014.
[34] J. Jorstad and D. Apelian, “Hypereutectic al-si alloys: Practical casting considerations,” International Journal of Metalcasting, vol. 3, no. 3, pp. 13–36, 2009.
[35] S. Abis, G. Barucca, and P. Mengucci, “Electron microscopy characterization of AlSn metal-metal matrix composites,” Journal of Alloys and Compounds, vol. 215, no. 1–2, pp. 309–313, 1994.
[36] B. T. Sofyan et al., “Effects of Sn content on the characteristics of 319 aluminium alloy,” Proceedings of the Australasian Conference and Exhibition - Aluminium Cast House Technology, vol. 2005, pp. 161–168, 2005.
[37] D. Abdul Saheb, “Aluminum silicon carbide and aluminum graphite particulate composites,” Journal of Engineering and Applied Sciences, vol. 6, no. 10, pp. 41–46, 2011.
[38] P. Sharma, S. Sharma, and D. Khanduja, “Journal of Asian Ceramic Societies A study on microstructure of aluminium matrix composites,” Integrative Medicine Research, vol. 3, no. 3, pp. 240–244, 2015.
[39] S. Kumar, R. S. Panwar, and O. P. Pandey, “Effect of dual reinforced ceramic particles on high temperature tribological properties of aluminum composites,” Ceramics International, vol. 39, no. 6, pp. 6333–6342, 2013.
[40] K. H. W. Seah, S. c. Sharma, and B. m. Girish, “Mechanical particulate properties composites of cast ZA -27 / graphite particulate Composites,” Materials & Design, vol. 16, no. 5, pp. 1–5, 1995.
[41] M. M. Haque and A. Sharif, “Study on wear properties of aluminium – silicon piston alloy,” vol. 118, pp. 69–73, 2001.
[42] B. K. Show, D. K. Mondal, and J. Maity, “Dry Sliding Wear Behavior of Aluminum-Based Metal Matrix Composites with Single (Al2O3) and Hybrid (Al2O3+ SiC) Reinforcements,” Metallography, Microstructure, and Analysis, vol. 3, no. 1, pp. 11–29, 2014.
[43] A. Sharma, S. Kumar, G. Singh, and O. P. Pandey, “Effect of particle size on wear behavior of al-garnet composites,” Particulate Science and Technology, vol. 33, no. 3, pp. 234–239, 2015.
[44] R. N. Rao, S. Das, D. P. Mondal, and G. Dixit, “RETRACTED: Dry sliding wear behaviour of cast high strength aluminium alloy (Al–Zn–Mg) and hard particle composites,” Wear, vol. 267, no. 9–10, pp. 1688–1695, Sep. 2009.
[45] G. Ranganath, S. C. Sharma, and M. Krishna, “Dry sliding wear of garnet reinforced zinc / aluminium metal matrix composites,” vol. 251, pp. 1408–1413, 2001.
[46] J. Singh and A. C. Chauhan, “Overview of wear performance of aluminium matrix composites reinforced with ceramic materials under the influence of controllable variables,” Ceramics International, vol. 42, no. 1, pp. 56–81, 2015.
[47] T. Rajmohan, K. Palanikumar, and S. Ranganathan, “Evaluation of mechanical and wear properties of hybrid aluminium matrix composites,” Transactions of Nonferrous Metals Society of China (English Edition), vol. 23, no. 9, pp. 2509–2517, 2013.
[48] K. Kaur and O. P. Pandey, “Microstructural characteristics of spray formed zircon sand reinforced LM13 composite,” Journal of Alloys and Compounds, vol. 503, no. 2, pp. 410–415, 2010.
[49] R. S. Panwar, S. Kumar, R. Pandey, and O. P. Pandey, “Study of non-lubricated wear of the Al-Si alloy composite reinforced with different ratios of coarse and fine size zircon sand particles at different ambient temperatures,” Tribology Letters, vol. 55, no. 1, pp. 83–92, 2014.
[50] S. Basavarajappa, G. Chandramohan, K. Mukund, M. Ashwin, and M. Prabu, “Dry Sliding Wear Behavior of Al 2219/SiCp-Gr Hybrid Metal Matrix Composites,” Journal of Materials Engineering and Performance, vol. 15, no. 6, pp. 668–674, Dec. 2006.
[51] S. C. Lim, “The relevance of wear-mechanism maps to mild-oxidational wear,” Tribology International, vol. 35, no. 11, pp. 717–723, 2002.
[52] T. S. Mahmoud, “Tribological behaviour of A390/Grp metal-matrix composites fabricated using a combination of rheocasting and squeeze casting techniques,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 222, no. 2, pp. 257–265, 2008.
[53] S. Doddamani, M. Kaleemulla, Y. Begum, A. KJ, and K. J. Anand, “An Investigation on Wear Behavior of Graphite Reinforced Aluminum Metal Matrix Composites,” pp. 1–6, 2017.
[54] C. S. Sivaramakrishnan, R. K. Mahanti, and R. Kumar, “The dispersion of lead and graphite in aluminium alloys for bearing applications,” Wear, vol. 96, no. 2, pp. 121–134, 1984.
[55] H. Torabian, J. P. Pathak, and S. N. Tiwari, “On wear characteristics of leaded aluminium-silicon alloys,” Wear, vol. 177, no. 1, pp. 47–54, 1994.
[56] S. Mahdavi and F. Akhlaghi, “Effect of the graphite content on the tribological behavior of Al/Gr and Al/30SiC/Gr composites processed by in situ powder metallurgy (IPM) method,” Tribology Letters, vol. 44, no. 1, pp. 1–12, 2011.
[57] A. Baradeswaran and A. Elaya Perumal, “Study on mechanical and wear properties of Al 7075/Al2O 3/graphite hybrid composites,” Composites Part B: Engineering, vol. 56, pp. 464–471, 2014.
[58] M. K. Surappa, “Aluminium matrix composites: Challenges and opportunities,” Sadhana - Academy Proceedings in Engineering Sciences, vol. 28, no. 1–2, pp. 319–334, 2003.
[59] R. Manikandan, T. V. Arjunan, and A. R. Akhil, “Studies on micro structural characteristics, mechanical and tribological behaviours of boron carbide and cow dung ash reinforced aluminium (Al 7075) hybrid metal matrix composite,” Composites Part B: Engineering, vol. 183, no. November 2019, 2020.
[60] S. Sharma, T. Nanda, and O. P. Pandey, “Investigation of T4 and T6 heat treatment on the wear properties of sillimanite reinforced LM30 aluminium alloy composites,” Wear, vol. 426–427, no. December 2018, pp. 27–36, 2019.