1- Yamaguchi S, Kani R, Kawakami K, Tsuji M, Inoue S, Lee C, et al. Fatigue behavior and crack initiation of CAD/CAM resin composite molar crowns. Dent Mater. 2018;34:1578–1584.
2- D’Arcangelo C, Vanini L, Rondoni GD, Vadini M, De Angelis F. Wear evaluation of prosthetic materials opposing themselves. Oper Dent. 2018;43:38–50.
3- Heintze SD, Cavalleri A, Forjanic M, Zellweger G, Rousson V. Wear of ceramic and antagonist—A systematic evaluation of influencing factors in vitro. Dent Mater.2008;24:433–449.
4- Mello PC, Coppedê AR, Macedo AP, Mattos MDGCD, Rodrigues RCS, Ribeiro RF. Abrasion wear resistance of different artificial teeth opposed to metal and composite antagonists. J App Oral Sci. 2009;17:451–456.
5- Naumova E, Schneider S, Arnold W, Piwowarczyk A. Wear behavior of ceramic CAD/CAM crowns and natural antagonists. Mater. 2017;10:244.
6- Habib SR, Alotaibi A, Al Hazza N, Allam Y, AlGhazi M. Two-body wear behavior of human enamel versus monolithic zirconia, lithium disilicate, ceramometal and composite resin. J Adv Prosthodont. 2019;11:23–31.
7- Stawarczyk B, Frevert K, Ender A, Roos M, Sener B, Wimmer T. Comparison of four monolithic zirconia materials with conventional ones: Contrast ratio, grain size, four-point flexural strength and two-body wear. J Mech Behav Biomed Mater. 2016;59:128–138.
8- Mitov G, Heintze SD, Walz S, Woll K, Muecklich F, Pospiech P. Wear behavior of dental Y-TZP ceramic against natural enamel after different finishing procedures. Dent Mater. 2012;28:909–918.
9- Arsecularatne JA, Dingeldein JP, Hoffman M. An in vitro study of the wear mechanism of a leucite glass dental ceramic. Biosurface and Biotribology. 2015;1:50–61.
10- Ohashi K, Kameyama Y, Wada Y, Midono T, Miyake K, Kunzelmann KH, Nihei T. Evaluation and comparison of the characteristics of three pressable lithium disilicate glass ceramic materials.”. Inter J Dev Res. 2017;7:16711–16716.
11- Bajraktarova-Valjakova E, Korunoska-Stevkovska V, Kapusevska B, Gigovski N, Bajraktarova-Misevska C, Grozdanov A. Contemporary Dental Ceramic Materials, A Review: Chemical Composition, Physical and Mechanical Properties, Indications for Use. Open Access Maced J Med Sci. 2018;6:1742.
12- Amer R, Kürklü D, Kateeb E, Seghi RR. Three-body wear potential of dental yttrium-stabilized zirconia ceramic after grinding, polishing, and glazing treatments. J. Prosthet. Dent. 2014;112:1151–1155.
13- Yin R, Jang YS, Lee MH, Bae TS. Comparative Evaluation of Mechanical Properties and Wear Ability of Five CAD/CAM Dental Blocks. Mater. 2019;12:2252.
14- Stöckl C, Hampe R, Stawarczyk B, Haerst M, Roos M. Macro-and microtopographical examination and quantification of CAD-CAM composite resin 2-and 3-body wear. J Prosthet Dent. 2018;120:537–545.
15- Oh WS, DeLong R, Anusavice KJ. Factors affecting enamel and ceramic wear: a literature review. J Prosthet Dent. 2002;87:451–459.
16- Heintze SD, Cavalleri A, Forjanic M, Zellweger G, Rousson V. A comparison of three different methods for the quantification of the in vitro wear of dental materials. Dent Mater. 2006;22:1051–1062.
17- Kunzelmann KH, Jelen B, Mehl A, Hickel R. Wear evaluation of MZ100 compared to ceramic CAD/CAM materials. Int J Comp Dent. 2001;4:171–184.
18- Mörmann WH, Stawarczyk B, Ender A, Sener B, Attin T, Mehl A. Wear characteristics of current aesthetic dental restorative CAD/CAM materials: two-body wear, gloss retention, roughness and Martens hardness. J Mech Behave Biomed Mater. 2013;20:113–125.
19- Heintze SD. How to qualify and validate wear simulation devices and methods. Dent Mater. 2006;22:712–734.
20- Kim MJ, Oh SH, Kim JH, Ju SW, Seo DG, Jun SH, et al. Wear evaluation of the human enamel opposing different Y-TZP dental ceramics and other porcelains. J Dentist. 2012;40:979–988.
21- Choi JW, Song EJ, Shin JH, Jeong TS, Huh JB. In Vitro Investigation of Wear of CAD/CAM Polymeric Materials Against Primary Teeth. Mater. 2017; 10:1410.
22- Gwon B, Bae EB, Lee JJ, Cho WT, Bae HY, Choi JW, Huh JB. Wear Characteristics of Dental Ceramic CAD/CAM Materials Opposing Various Dental Composite Resins. Mater. 2019;12:1839.
23- Jung YS, Lee JW, Choi YJ, Ahn JS, Shin SW, Huh JB. A study on the in vitro wear of the natural tooth structure by opposing zirconia or dental porcelain. J Adv Prosthodont. 2010;2:111–115.
24- Tsujimoto A, Barkmeier WW, Fischer NG, Nojiri K, Nagura Y, Takamizawa T, Miazaki M. Wear of resin composites: Current insights into underlying mechanisms, evaluation methods and influential factors. Japan Dent Sci Rev. 2018;54:76–87.
25- D’Arcangelo C, Vanini L, Rondoni GD, Pirani M, Vadini M, Gattone M, De Angelis F. Wear properties of a novel resin composite compared to human enamel and other restorative materials. Oper Dent. 2014;39:612–618.
26- Preis V, Schmalzbauer M, Bougeard D, Schneider-Feyrer S, Rosentritt M. Surface properties of monolithic zirconia after dental adjustment treatments and in vitro wear simulation. J Dent. 2015;43:133–139.
27- Preis V, Behr, M, Handel G, Schneider-Feyrer S, Hahnel S, Rosentritt M. Wear performance of dental ceramics after grinding and polishing treatments. J Mech BehaveBiomed Mater. 2012;10:13–22.
28- D’Arcangelo C, Vanini L, Rondoni GD, De Angels F. Wear properties of dental ceramics and porcelains compared with human enamel. J Prosthet Dent. 2016;115:350–355.
29- Stawarczyk B, Özcan M, Schmutz F, Trottmann A, Roos M, Hämmerle CH. Two-body wear of monolithic, veneered and glazed zirconia and their corresponding enamel antagonists. Acta Odontol Scand. 2013;71:102–112.
30- Kewekordes T, Wille S, Kern M. Wear of polyetherketoneketones—Influence of titanium dioxide content and antagonistic material. Dent Mater. 2018;34:560–567.
31- Hu X, Zhang Q, Ning J, Wu W, Li C. Study of Two-Body Wear Performance of Dental Materials. J Nation Med Assoc. 2018;110:250–255.
32- Wassell RW, McCabe JE, Walls AWG. A two-body frictional wear test. J Dent Res. 1994;73:1546–1553.
33- Chun KJ, Lee JY. Comparative study of mechanical properties of dental restorative materials and dental hard tissues in compressive loads. J Dent biome. 2014;5.
34- Monasky GE, Taylor DF. Studies on the wear of porcelain, enamel, and gold. J Prosthet Dent. 1971;25:299–306.
35- Fisher RM, Moore BK, Swartz ML, Dykema RW. The effects of enamel wear on the metal-porcelain interface. J Prosthet Dent. 1983;50:627–31.
36- Coldea A, Swain MV, Thiel N. Mechanical properties of polymer-infiltrated-ceramic-network materials. Dent Mater. 2013;29:419–426.
37- Hao Z, Ma Y, Liu W, Meng Y, Nakamura K, Shen, J. Wang H. Influence of low-temperature degradation on the wear characteristics of zirconia against polymer-infiltrated ceramic-network material. J Prosthet Dent. 2018;120:596–602.
38- Elhomiamy E. Wear Behaviour and Surface Roughness of Polymer Infiltrated Ceramic Material Compared to Pressable Glass Ceramic. Alexandria Dent J.2015;40.
39- Ashtiani AH, Azizian M, Rohani A. Comparison the degree of enamel wear behavior opposed to Polymer-infiltrated ceramic and feldspathic porcelain. Dent Res J.2019; 16:71.
40- Oliveira JCD, Aiello G, Mendes B, Urban VM, Campanha NH, Jorge JH. Effect of storage in water and thermocycling on hardness and roughness of resin materials for temporary restorations. Mater Res. 2010;13:355–359.
41- Beuer F, Stimmelmayr M, Gueth JF, Edelhoff D, Naumann M. In vitro performance of full-contour zirconia single crowns. Dent Mater. 2012;28:449–456.
42- Bartolo D, Cassar G, Husain NAH, Özcan M, Camilleri J. Effect of polishing procedures and hydrothermal aging on wear characteristics and phase transformation of zirconium dioxide. J Prosthet Dent. 2017;117:545–551.
43- Pelka M, Ebert J, Schneider H, Kramer N, Petschelt A. Comparison of two‐and three‐body wear of glass‐ionomers and composites. Eur J oral Sci. 1996;104:132–137.
44- Li H, Zhou ZR. Wear behaviour of human teeth in dry and artificial saliva conditions. Wear. 2001;249:980–984.
45- Seghi RR., Rosenstiel SF, Bauer P. Abrasion of human enamel by different dental ceramics in vitro. J Dent Res.1991;70:221–225.
46- Kisi EH, Howard C J. Crystal structures of zirconia phases and their inter-relation. In KeyEng Mater. 1998;53:1–36.
47- Preis V, Behr M, Hahnel S, Handel G, Rosentritt M. In vitro failure and fracture resistance of veneered and full-contour zirconia restorations. J Dent. 2012;40:921–928.