[1] Ramnath, B. V., Elanchezhian, C., Annamalai, R. M., Aravind, S., Atreya, T. S. A., Vignesh, V., & Subramanian, C. (2014). Aluminium metal matrix composites–a review. Rev. Adv. Mater. Sci, 38(5), 55-60.
[2] Maneiah, D., Shunmugasundaram, M., Reddy, A. R., & Begum, Z. (2020). Optimization of machining parameters for surface roughness during abrasive water jet machining of aluminium/magnesium hybrid metal matrix composites. Materials Today: Proceedings, 27, 1293-1298.
[3] Jadhav, P. R., Sridhar, B. R., Nagaral, M., & Harti, J. I. (2020). Mechanical behavior and fractography of graphite and boron carbide particulates reinforced A356 alloy hybrid metal matrix composites. Advanced Composites and Hybrid Materials, 3(1), 114-119.
[4] Natrayan, L., Kumar, M. S., & Chaudhari, M. (2020). Optimization of Squeeze Casting Process Parameters to Investigate the Mechanical Properties of AA6061/Al 2 O 3/SiC Hybrid Metal Matrix Composites by Taguchi and Anova Approach. In Advanced Engineering Optimization Through Intelligent Techniques (pp. 393-406). Springer, Singapore.
[5] Arunachalam, R., Piya, S., Krishnan, P. K., Muraliraja, R., Christy, J. V., Mourad, A. H. I., & Al-Maharbi, M. (2020). Optimization of stir–squeeze casting parameters for production of metal matrix composites using a hybrid analytical hierarchy process–Taguchi-Grey approach. Engineering Optimization, 52(7), 1166-1183.
[6] Natrayan, L., & Kumar, M. S. (2020). Influence of silicon carbide on tribological behaviour of AA2024/Al2O3/SiC/Gr hybrid metal matrix squeeze cast composite using Taguchi technique. Materials Research Express, 6(12), 1265f9.
[7] Ahamad, N., Mohammad, A., Sadasivuni, K. K., & Gupta, P. (2020). Structural and mechanical characterization of stir cast Al–Al2O3–TiO2 hybrid metal matrix composites. Journal of Composite Materials, 54(21), 2985-2997.
[8] Hossain, S., Rahman, M. M., Chawla, D., Kumar, A., Seth, P. P., Gupta, P., ... & Jamwal, A. (2020). Fabrication, microstructural and mechanical behavior of Al-Al2O3-SiC hybrid metal matrix composites. Materials Today: Proceedings, 21, 1458-1461.
[9] Dhanesh, S., Kumar, K. S., Yohannan, L., Fayiz, N. M., & Sajith, E. (2021). Aluminium metal matrix composites reinforced with non-conventional materials: A review. Materials Today: Proceedings, 45, 1371-1375.
[10] Devanathan, R., Ravikumar, J., Boopathi, S., Selvam, D. C., & Anicia, S. A. (2020). Influence in mechanical properties of stir cast aluminium (AA6061) hybrid metal matrix composite (HMMC) with silicon carbide, fly ash and coconut coir ash reinforcement. Materials Today: Proceedings, 22, 3136-3144.
[11] Kumar, A., Goyal, K. K., Bhardwaj, A., & Sharma, N. (2021, April). Development and Characterization of AA2024/SiC/Gr/Fly ash Hybrid Composite. In Journal of Physics: Conference Series (Vol. 1854, No. 1, p. 012022). IOP Publishing.
[12] Reddy, B. R., & Srinivas, C. (2018). Fabrication and characterization of silicon carbide and fly ash reinforced aluminium metal matrix hybrid composites. Materials Today: Proceedings, 5(2), 8374-8381.
[13] Sharma, V. K., Singh, R. C., & Chaudhary, R. (2017). Effect of flyash particles with aluminium melt on the wear of aluminium metal matrix composites. Engineering science and technology, an international journal, 20(4), 1318-1323.
[14] Kumar, B. P., & Birru, A. K. (2017). Microstructure and mechanical properties of aluminium metal matrix composites with addition of bamboo leaf ash by stir casting method. Transactions of nonferrous metals society of china, 27(12), 2555-2572.
[15] Jawalkar, C. S., Kant, S., Panwar, N., Sharma, M. D., & Pali, H. S. (2020). Effect of particle size variation of bagasse ash on mechanical properties of aluminium hybrid metal matrix composites. Materials Today: Proceedings, 21, 2024-2029.
[16] Zhou, M. Y., Ren, L. B., Fan, L. L., Zhang, Y. W. X., Lu, T. H., Quan, G. F., & Gupta, M. (2020). Progress in research on hybrid metal matrix composites. Journal of Alloys and Compounds, 155274.
[17] Jawalkar, C. S., Verma, A. S., & Suri, N. M. (2017). Fabrication of aluminium metal matrix composites with particulate reinforcement: a review. Materials Today: Proceedings, 4(2), 2927-2936.
[18] Reddy, K. S. T., Manohar, H. S., Manjunath, G., & Babu, K. A. (2021). Synthesis and characterization of silicon nitride and graphite reinforced aluminium hybrid metal matrix composites. Materials Today: Proceedings, 45, 304-306.
[19] Bhoi, N. K., Singh, H., & Pratap, S. (2020). Developments in the aluminum metal matrix composites reinforced by micro/nano particles–a review. Journal of Composite Materials, 54(6), 813-833.
[20] Reddy, P. S., Kesavan, R., & Ramnath, B. V. (2018). Investigation of mechanical properties of aluminium 6061-silicon carbide, boron carbide metal matrix composite. Silicon, 10(2), 495-502.
[21] Kumar, N. S., Suresh, R., & Shankar, G. S. (2020). High temperature wear behavior of Al2219/n-B4C/MoS2 hybrid metal matrix composites. Composites Communications, 19, 61-73.
[22] Babu, B. S., Prathap, P., Balaji, T., Gowtham, D., Adi, S. S., Divakar, R., & Ravichandran, S. (2020). Studies on mechanical properties of aluminum based hybrid metal matrix composites. Materials Today: Proceedings, 33, 1144-1148.
[23] Kumar, A., Arafath, M. Y., Gupta, P., Kumar, D., Hussain, C. M., & Jamwal, A. (2020). Microstructural and mechano-tribological behavior of Al reinforced SiC-TiC hybrid metal matrix composite. Materials Today: Proceedings, 21, 1417-1420.
[24] Venkatesh, V. S. S., & Deoghare, A. B. (2021). Microstructural Characterization and Mechanical Behaviour of SiC and Kaoline Reinforced Aluminium Metal Matrix Composites Fabricated Through Powder Metallurgy Technique. Silicon, 1-15.
[25] Kumar, N. S. (2018). Mechanical and wear behavior of ZA-27/Sic/Gr hybrid metal matrix composites. Materials Today: Proceedings, 5(9), 19969-19975.
[26] Bhowmik, A., Chakraborty, D., Dey, D., & Biswas, A. (2020). Investigation on wear behaviour of Al7075-SiC metal matrix composites prepared by stir casting. Materials Today: Proceedings, 26, 2992-2995.
[27] Ye, T., Xu, Y., & Ren, J. (2019). Effects of SiC particle size on mechanical properties of SiC particle reinforced aluminum metal matrix composite. Materials Science and Engineering: A, 753, 146-155.
[28] Gurunagendra, G. R., Raju, B. R., Pujar, V., Amith, D. G., & Siddesha, H. S. (2021). Mechanical, wear and corrosion properties of micro particulates reinforced ZA-27 hybrid MMC by stir casting: A review. Materials Today: Proceedings.
[29] Sangeetha, M., Joy, N., Adhisheshan, G. S., Kennady, J. A., Kamalinee, S., & Bashaa, S. B. M. (2021). Thermal analysis of hybrid aluminium metal matrix composites. Materials Today: Proceedings, 44, 3846-3850.
[30] Ramnath, B. V., Naveen, E., Subramanian, S. A., Rakesh, R., & Krishnan, S. S. (2021). Study on Wear and Corrosion Behaviour of Aluminium Hybrid MMC. In Advances in Materials and Manufacturing Engineering (pp. 303-314). Springer, Singapore.
[31] Jain, P. K., Baredar, P., & Soni, S. C. (2019). Development of silicon carbide particle reinforced aluminium 6101 metal matrix composite using two-step stir casting. Materials Today: Proceedings, 18, 3521-3525.
[32] Sharma, A. K., Bhandari, R., Aherwar, A., & Pinca-Bretotean, C. (2020). A study of fabrication methods of aluminum based composites focused on stir casting process. Materials Today: Proceedings, 27, 1608-1612.
[33] Ahamad, N., Mohammad, A., Sadasivuni, K. K., & Gupta, P. (2020). Phase, microstructure and tensile strength of Al–Al2O3–C hybrid metal matrix composites. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 234(13), 2681-2693.
[34] Fenghong, C., Chang, C., Zhenyu, W., Muthuramalingam, T., & Anbuchezhiyan, G. (2019). Effects of silicon carbide and tungsten carbide in aluminium metal matrix composites. Silicon, 11(6), 2625-2632.
[35] Hima Gireesh, C., Durga Prasad, K. G., & Ramji, K. (2018). Experimental investigation on mechanical properties of an Al6061 hybrid metal matrix composite. Journal of Composites Science, 2(3), 49.
[36] Kanth, U. R., Rao, P. S., & Krishna, M. G. (2019). Mechanical behaviour of fly ash/SiC particles reinforced Al-Zn alloy-based metal matrix composites fabricated by stir casting method. Journal of Materials Research and Technology, 8(1), 737-744.
[37] Venugopal, S., & Karikalan, L. (2021). Microstructure and physical properties of hybrid metal matrix composites AA6061-TiO2-SiC via stir casting techniques. Materials Today: Proceedings, 37, 1289-1294.
[38] Daniel, S. A. A., Sakthivel, M., Gopal, P. M., & Sudhagar, S. (2018). Study on tribological behaviour of Al/SiC/MoS 2 hybrid metal matrix composites in high temperature environmental condition. Silicon, 10(5), 2129-2139.
[39] Patel, M., Sahu, S. K., & Singh, M. K. (2020). Abrasive wear behavior of SiC particulate reinforced AA5052 metal matrix composite. Materials Today: Proceedings, 33, 5586-5591.
[40] Nathan, V. B., Soundararajan, R., Abraham, C. B., Vinoth, E., & Narayanan, J. K. (2020). Study of mechanical and metallurgical characterization of correlated aluminium hybrid metal matrix composites. Materials Today: Proceedings.
[41] Hillary, J. J. M., Ramamoorthi, R., Joseph, J. D. J., & Samuel, C. S. J. (2020). A study on microstructural effect and mechanical behaviour of Al6061–5% SiC–TiB2 particulates reinforced hybrid metal matrix composites. Journal of Composite Materials, 54(17), 2327-2337.
[42] Shuvho, M. B. A., Chowdhury, M. A., Kchaou, M., Roy, B. K., Rahman, A., & Islam, M. A. (2020). Surface characterization and mechanical behavior of aluminum based metal matrix composite reinforced with nano Al2O3, SiC, TiO2 particles. Chemical Data Collections, 28, 100442.
[43] Devaganesh, S., Kumar, P. D., Venkatesh, N., & Balaji, R. (2020). Study on the mechanical and tribological performances of hybrid SiC-Al7075 metal matrix composites. Journal of Materials Research and Technology, 9(3), 3759-3766.
[44] Ahamad, N., Mohammad, A., & Gupta, P. (2021). Wear characteristics of Al matrix reinforced with Al2O3-carbon hybrid metal matrix composites. Materials Today: Proceedings, 38, 63-68.
[45] Mahdavi, S., & Akhlaghi, F. (2011). Effect of the SiC particle size on the dry sliding wear behavior of SiC and SiC–Gr-reinforced Al6061 composites. Journal of materials science, 46(24), 7883-7894.
[46] Shehata, F., ElMahallawy, N., Arab, M., & Agwa, M. (2013). Equal channel angular pressing of Al-SiC composites fabricated by stir casting. Open Journal of Metal, 3(02), 26.
[47] Chandio, A. D., Ansari, M. B., Hussain, S., & Siddiqui, M. A. (2019). Silicon carbide effect as reinforcement on aluminium metal matrix composite. J. chem. soc. pak, 41(4), 650-654.