1. Adams MA, Roughley PJ: What is intervertebral disc degeneration, and what causes it? Spine 2006, 31(18):2151-2161.
2. Adams MA, Freeman BJ, Morrison HP, Nelson IW, Dolan P: Mechanical initiation of intervertebral disc degeneration. Spine 2000, 25(13):1625-1636.
3. Liang J, Dong Y, Hong Z: Risk factors for predicting symptomatic adjacent segment degeneration requiring surgery in patients after posterior lumbar fusion. Journal of Orthopaedic Surgery Research 2014, 9(1):97.
4. Paul P, Garton HJ, Gala VC, Hoff JT, Mcgillicuddy JE: Adjacent segment disease after lumbar or lumbosacral fusion: review of the literature. Spine 2004, 29(17):1938-1944.
5. Wang H, Ma L, Yang D, Wang T, Liu S, Yang S, Ding W: Incidence and risk factors of adjacent segment disease following posterior decompression and instrumented fusion for degenerative lumbar disorders. Medicine 2017, 96(5):e6032.
6. Hsieh YY, Chen CH, Tsuang FY, Wu LC, Lin SC, Chiang CJ: Removal of fixation construct could mitigate adjacent segment stress after lumbosacral fusion: A finite element analysis. Clinical Biomechanics 2017, 43(Complete):115.
7. Lv QB, Gao X, Pan XX, Jin HM, Lou XT, Li SM, Yan YZ, Wu CC, Lin Y, Ni WF et al: Biomechanical properties of novel transpedicular transdiscal screw fixation with interbody arthrodesis technique in lumbar spine: A finite element study. J Orthop Translat 2018, 15:50-58.
8. Más Y, Gracia L, Ibarz E, Gabarre S, Peña D, Herrera A: Finite element simulation and clinical follow-up of lumbar spine biomechanics with dynamic fixations. Plos One 2017, 12(11):e0188328.
9. Tang S, Rebholz BJ: Does lumbar microdiscectomy affect adjacent segmental disc degeneration? A finite element study. Journal of Surgical Research 2013, 182(1):62-67.
10. Wen-Hsien C, Yi-Jie K, Shang-Chih L, Chih-Wei W, Shih-Hao C, Yeung-Jen C, Jiun-Ren HJS: Comparison among load-, ROM-, and displacement-controlled methods used in the lumbosacral nonlinear finite-element analysis. Spine 2013, 38(5):276-285.
11. Zhu R, Niu WX, Zeng ZL, Tong JH, Zhen ZW, Zhou S, Yu Y, Cheng LM: The effects of muscle weakness on degenerative spondylolisthesis: A finite element study. Clinical Biomechanics 2017, 41(1):34-38.
12. Kim HJ, Kang KT, Chun HJ, Lee CK, Chang BS, Jin SY: The influence of intrinsic disc degeneration of the adjacent segments on its stress distribution after one-level lumbar fusion. European Spine Journal 2015, 24(4):827-837.
13. Chuang WH, Lin SC, Chen SH, Wang CW, Tsai WC, Chen YJ, Hwang JR: Biomechanical effects of disc degeneration and hybrid fixation on the transition and adjacent lumbar segments: trade-off between junctional problem, motion preservation, and load protection. Spine 2012, 37(24):1488-1497.
14. Li J, Zhang X, Xu W, Xi Z, Xie L: Reducing the extent of facetectomy may decrease morbidity in failed back surgery syndrome. BMC Musculoskelet Disord 2019, 20(1):369.
15. Ho-Joong K, Heoung-Jae C, Hwan-Mo L, Kyoung-Tak K, Choon-Ki L, Bong-Soon C, Jin S, Yeom: The biomechanical influence of the facet joint orientation and the facet tropism in the lumbar spine. Spine Journal 2013, 13(10):1301-1308.
16. Dreischarf M, Zander T, Shiraziadl A, Puttlitz CM, Adam CJ, Chen CS, Goel VK, Kiapour A, Kim YH, Labus KM: Comparison of eight published static finite element models of the intact lumbar spine: predictive power of models improves when combined together. J Biomech 2014, 47(8):1757-1766.
17. Renner SM, Natarajan RN, Patwardhan AG, Havey RM, Voronov LI, Guo BY, Andersson GBJ, An HS: Novel model to analyze the effect of a large compressive follower pre-load on range of motions in a lumbar spine. J Biomech 2007, 40(6):1326-1332.
18. Matsukawa K, Yato Y, Imabayashi H, Hosogane N, Asazuma T, Chiba K: Biomechanical evaluation of lumbar pedicle screws in spondylolytic vertebrae: comparison of fixation strength between the traditional trajectory and a cortical bone trajectory. J Neurosurg Spine 2016, 24(6):910-915.
19. Schmidt H, Heuer F, Drumm J, Klezl Z, Claes L, Wilke HJ: Application of a calibration method provides more realistic results for a finite element model of a lumbar spinal segment. Clinical Biomechanics 2007, 22(4):377-384.
20. Schmidt H, Heuer F, Simon U, Kettler A, Rohlmann A, Claes L, Wilke HJ: Application of a new calibration method for a three-dimensional finite element model of a human lumbar annulus fibrosus. Clinical Biomechanics 2006, 21(4):337-344.
21. Akiah MA, Tanaka M: Biomechanical investigation on the influence of the regional material degeneration of an intervertebral disc in a lower lumbar spinal unit: A finite element study. Computers in Biology Medicine 2018, 98.
22. Ottardi C, Galbusera F, Luca A, Prosdocimo L, Sasso M, Brayda-Bruno M, Villa TJME, Physics: Finite element analysis of the lumbar destabilization following pedicle subtraction osteotomy. Medical Engineering Physics 2016, 38(5):506-509.
23. Pfirrmann CW, Metzdorf A, ., Zanetti M, ., Hodler J, ., Boos N, . %J Spine: Magnetic resonance classification of lumbar intervertebral disc degeneration. Spine 2001, 26(17):1873-1878.
24. Qasim M, Natarajan RN, An HS, Andersson GB: Damage accumulation location under cyclic loading in the lumbar disc shifts from inner annulus lamellae to peripheral annulus with increasing disc degeneration. J Biomech 2014, 47(1):24-31.
25. Grønbaek K, Christensen PB, Hamilton-Dutoit S, Federspiel BH, Hage E, Jensen OJ, Vyberg M: Interobserver variation in interpretation of serial liver biopsies from patients with chronic hepatitis C. J Viral Hepat 2002, 9(6):443-449.
26. Perazzo H, Fernandes FF, Soares JC, Fittipaldi J, Cardoso SW, Grinsztejn B, Veloso VG: Learning curve and intra/interobserver agreement of transient elastography in chronic hepatitis C patients with or without HIV co-infection. Clin Res Hepatol Gastroenterol 2016, 40(1):73-82.
27. Buell TJ, Bess S, Xu M, Schwab FJ, Lafage V, Ames CP, Shaffrey CI, Smith JS: Optimal tether configurations and preload tensioning to prevent proximal junctional kyphosis: a finite element analysis. J Neurosurg Spine 2019:1-11.
28. Kang KT, Koh YG, Son J, Jin SY, Park JH, Kim HJ: Biomechanical evaluation of pedicle screw fixation system in spinal adjacent levels using polyetheretherketone, carbon-fiber-reinforced polyetheretherketone, and traditional titanium as rod materials. Composites Part B Engineering 2017:S1359836817302159.
29. Bermel EA, Barocas VH, Ellingson AM: The role of the facet capsular ligament in providing spinal stability. Comput Methods Biomech Biomed Engin 2018, 21(13):712-721.
30. Panjabi MM, Oxland TR, Yamamoto I, Crisco JJ: Mechanical behavior of the human lumbar and lumbosacral spine as shown by three-dimensional load-displacement curves. J Bone Joint Surg Am 1994, 76(3):413-424.
31. Schilling C, Krüger S, Grupp TM, Duda GN, Blömer W, Rohlmann A: The effect of design parameters of dynamic pedicle screw systems on kinematics and load bearing: an in vitro study. European spine journal : official publication of the European Spine Society, the European Spinal Deformity Society, and the European Section of the Cervical Spine Research Society 2011, 20(2):297-307.
32. Wilson DC, Niosi CA, Zhu QA, Oxland TR, Wilson DR: Accuracy and repeatability of a new method for measuring facet loads in the lumbar spine. J Biomech 2006, 39(2):348-353.
33. Li J, Xu W, Zhang X, Xi Z, Xie L: Biomechanical role of osteoporosis affects the incidence of adjacent segment disease after percutaneous transforaminal endoscopic discectomy. Journal of Orthopaedic Surgery and Research 2019.
34. Modic MT, Masaryk TJ, Ross JS, Carter JR, %J Radiology: Imaging of degenerative disk disease. Radiology 1988, 168(1):177-186.
35. Coste J, Judet O, Barre O, Siaud JR, Lara ACD, Paolaggi JBJJoCE: Inter- and intraobserver variability in the interpretation of computed tomography of the lumbar spine. Journal of Clinical Epidemiology 1994, 47(4):375.
36. Heuer F, Schmidt H, Klezl Z, Claes L, Wilke H-J: Stepwise reduction of functional spinal structures increase range of motion and change lordosis angle. J Biomech 2007, 40(2):271-280.
37. Mochida J, Nishimura K, Nomura T, Toh E, Chiba M: The importance of preserving disc structure in surgical approaches to lumbar disc herniation. Spine 1996, 21(13):1556-1564.
38. Schaller B: Failed back surgery syndrome: the role of symptomatic segmental single-level instability after lumbar microdiscectomy. European spine journal : official publication of the European Spine Society, the European Spinal Deformity Society, and the European Section of the Cervical Spine Research Society 2004, 13(3):193-198.
39. Woldtvedt DJ, Womack W, Gadomski BC, Schuldt D, Puttlitz CM: Finite element lumbar spine facet contact parameter predictions are affected by the cartilage thickness distribution and initial joint gap size. J Biomech Eng 2011, 133(6):061009-061009.
40. Park WM, Kim K, Kim YH: Effects of degenerated intervertebral discs on intersegmental rotations, intradiscal pressures, and facet joint forces of the whole lumbar spine. Comput Biol Med 2013, 43(9):1234-1240.
41. Ho-Joong K, Kyoung-Tak K, Juhyun S, Choon-Ki L, Bong-Soon C, Jin S, Yeom: The influence of facet joint orientation and tropism on the stress at the adjacent segment after lumbar fusion surgery: a biomechanical analysis. Spine Journal Official Journal of the North American Spine Society 2015, 15(8):1841-1847.
42. Adams MA, Dolan P: Intervertebral disc degeneration: evidence for two distinct phenotypes. J Anat 2012, 221(6):497-506.
43. Li J, Xu W, Jiang Q, Xi Z, Zhang X, Wang N, Xie L, Liu Y: Indications Selection for Surgeons Training in the Translaminar Percutaneous Endoscopic Discectomy Based on Finite Element Analysis. BioMed Research International 2020, 2020:1-13.
44. Yang P, Zhang Y, Ding HW, Liu J, Ye LQ, Xiao J, Tu Q, Yang T, Wang F, Sun GG: Pedicle screw fixation with kyphoplasty decreases the fracture risk of the treated and adjacent non-treated vertebral bodies: a finite element analysis. J Huazhong Univ Sci Technolog Med Sci 2016, 36(6):887-894.
45. Zhang L, Yang G, Wu L, Yu B: The biomechanical effects of osteoporosis vertebral augmentation with cancellous bone granules or bone cement on treated and adjacent non-treated vertebral bodies: a finite element evaluation. Clin Biomech (Bristol, Avon) 2010, 25(2):166-172.