[1]
|
Suresh S, Mortensen A, “Fundamentals of Functionally Graded Materials, Processing and Thermomechanical Behaviour of Graded Metals and Metal-Ceramic Composites,” in Communications Ltd., ISBN 1-86125-063-0 , London, UK., 1998.
|
[2]
|
Miyamoto, Y.; Kaysser, W. A.; Rabin, B. H.; Kawasaki, A. & Ford, R. G. (Edts.), “Functionally Graded Materials: Design, Processing and Applications,” in Kluwer Academic Publishers, ISBN 0-412-60760-3 , Boston, USA., 1999.
|
[3]
|
Ramesh Babu N, Ramesh MR, Kiran Aithal S, “Evaluation of Mechanical and Tribological Properties of Directionally Solidified Al-Si Based FG Composite,” Silicon, vol. 12, pp. 701-713, 2020.
|
[4]
|
K Aithal, V Desai, N Narendranath, PG Mukunda, “Microstructure, Hardness and Wear Characterization of Al-Si FGMs,” Indian Foundry Journal , vol. 58, no. 5, pp. 39-48, 2012.
|
[5]
|
S. R. S. S.Ghanaraja, “Synthesis and mechanical properties of cast alumina nano-particle reinforced metal matrix composites,” Materials Processing and Characterization , vol. 2, pp. 3656-3665, 2015.
|
[6]
|
A. Y. S. A. E. A. Iman S. El-Mahallawi, “Nanoreinforced Cast Al-Si Alloys with Al2O3, TiO2 and ZrO2 Nanoparticles,” metals, pp. 802-821, 2015.
|
[7]
|
Mohsen Hajizamani, Hamidreza Baharvandi, “Fabrication and Studying the Mechanical Properties of A356 Alloy Reinforced with Al2O3-10% Vol. ZrO2 Nanoparticles through Stir Casting,” Advances in Materials Physics and Chemistry, vol. 1, pp. 26-30, 2011.
|
[8]
|
Ali Mazahery, Mohsen Ostadshabani, “Investigation on mechanical properties of nano-Al2O3-reinforced aluminum matrix composites,” Journal of Composite Materials, pp. 1-8, 2011.
|
[9]
|
M. Rahimian, N. Ehsani, N. Parvin, H.R. Baharvandi, “The effect of particle size, sintering temperature and sintering time on the properties of Al–Al2O3 composites, made by powder metallurgy,” Journal of Materials Processing Technology, vol. 209, no. 14, pp. 5387-5393, 2009.
|
[10]
|
S. Mosleh-Shirazi, F. Akhlaghi, “Tribological behavior of Al/SiC and Al/SiC/2vol.%Gr nanocomposites containing different amounts of nano SiC particles,” Materials Research Express, vol. 6, no. 6, pp. 1-20, 2019.
|
[11]
|
Y. Pazhouhanfar, B. Eghbali, “Microstructural characterization and mechanical properties of TiB2 reinforced Al6061 matrix composites produced using stir casting process,” Materials Science and Engineering: A, vol. 710, pp. 172-180, 2018.
|
[12]
|
Reddy, P.S., Kesavan, R. & Vijaya Ramnath, B. Investigation of Mechanical Properties of Aluminium 6061-Silicon Carbide, Boron Carbide Metal Matrix Composite. Silicon 10, 495–502 (2018). https://doi.org/10.1007/s12633-016-9479-8
|
[13]
|
R. Tyagi, “Synthesis and tribological characterization of in situ cast Al–TiC composites,” Wear, vol. 259, no. 1, pp. 569-576, 2005.
|
[14]
|
Asadollahi M and Khalkhali A, “Optimization of mechanical and microstructural properties of friction stir spot welded AA 6061 -T6 reinforced with SiC nanoparticles,” Materials Research Express, 2018.
|
[15]
|
Kannan C and Ramanujam R, “Mechanical and tribological behaviour of molten salt processed self lubricated aluminium composite under different treatments,” Materials Research Express, 2018.
|
[16]
|
Gurusamy P, Prabu SB, Paskaramoorthy R, “Influence of processing temperatures on mechanical properties and microstructure of squeeze cast aluminum alloy composites,” Mater Manuf Process, vol. 30, pp. 367-73, 2015.
|
[17]
|
K Aithal, V Desai, PG Mukunda, “Effect of L/D ratio on Al-Si functionally graded material cast through centrifuge technique,” Advanced Materials Research, vol. 213, pp. 281-285, 2011.
|
[18]
|
Kiran Aithal, Vijay Desi, Narendranath S, P G Mukunda, “Evolution of Microstructure and Hardness of Al-Si Functionally Graded Material Cast through centrifuge Technique using Hypereutectic and Eutectic Al-Si,” International Journal of Mechanical and Materials Engineering, vol. 6, no. 2, pp. 275-279, 2011.
|
[19]
|
Kiran Aithal, Vijay Desai, Narendranath S, P G Mukunda, “Effect of L/D ratio on Al-Si Functionally Graded Material cast through Centrifuge Technique,” International Journal of Mechanical and Materials Engineering, vol. 6, no. 2, pp. 275-279, 2011.
|
[20]
|
Ramanathan Arunachalam, Pradeep Kumar Krishnan, Rajaraman Muraliraja, “A review on the production of metal matrix composites through stir casting – Furnace design, properties, challenges, and research opportunities,” Journal of Manufacturing Processes, vol. 42, pp. 213-245, 2019.
|
[21]
|
Ahmed Y. Shash, Amer E. Amer and Moataz El-Saeed, “Influence of Al2O3 Nano-dispersions on Mechanical and Wear Resistance Properties of Semisolid Cast A356 Al Alloy,” Mechanical and Materials Engineering of Modern Structure and Component Design, vol. 70, pp. 13-24, 2015.
|
[22]
|
K S Chethan, S Kiran Aithal, B K Muralidhara, “Enhancing the mechanical and tribological properties of solid cylindrical aluminum specimen by reinforcing alumina nanoparticulate through centrifuge casting technique,” Mater. Res. Express 6 1065g9, vol. 6, no. 10, pp. 1-10, 2019.
|
[23]
|
Nandipati G, kommineni R, Damera N R, Nallu R, “Fabrication and study of the mechanical properties of AA2024 alloy reinforced with B4C nano-particles using ultrasonic cavitation method,” IOSR Journal of Mechanical and Civil Engineering, vol. 7, pp. 1-7, 2013.
|
[24]
|
Hajizamani M, Baharvandi H, “Fabrication and studying the mechanical properties of A356 alloy reinforced with Al2O3-10% vol. ZrO2 nanoparticles through stir casting,” Advances in Materials Physics and Chemistry, vol. 1, pp. 26-30, 2011.
|
[25]
|
Pace, Metallographic hand book, Tucson, Arizona: Pace Technologies, 2011.
|
[26]
|
Amirkhanlou S. Niroumand B, “Development of Al356/SiCp cast composites by injection of SiCp containing composite powders,” Mater. Des., vol. 32, pp. 1895-1902, 2011.
|
[27]
|
Nallusamy, T., Vijayakumar, S. Reinforcements, Manufacturing Techniques, and Respective Property Changes of Al2O3/SiC Based Composites: A Review. Silicon (2021). https://doi.org/10.1007/s12633-021-01108-1
|
[28]
|
Xiang Zeng, Wei Liu, Ben Xu, Guogang Shu, Qiulin Li, “Microstructure and Mechanical Properties of Al–SiC Nanocomposites Synthesized by Surface-Modified Aluminium Powder,” Metals, vol. 8, no. 253, pp. 1-11, 2018.
|
[29]
|
A.L. Geiger, J.A. Walker, J. Met., vol. 43, pp. 8-15, 1991.
|
[30]
|
Sakthi Sadhasivam, R., Ramanathan, K., Ravichandran, M. et al. Experimental Investigations on Microstructure, Properties and Workability Behavior of Zinc Oxide Reinforced Al–Si–Mg Matrix Composites. Silicon (2021). https://doi.org/10.1007/s12633-021-01012-8
|
[31]
|
Shabani, M.O., Heydari, F. & Khorram, A. The Effect of Electromagnetic Stirrer on the Size and Morphology of Intermetallic Particles in Al-Si Metal Matrix Composite. Silicon 11, 2539–2546 (2019). https://doi.org/10.1007/s12633-018-0042-7
|
[32]
|
Y. Yang, J. Lan, X. Li, Mater. Sci. Eng. A, vol. A380, pp. 378-383, 2004.
|