[1] Gorman J, Hunt S, Riccardella P, et al. PWR reactor vessel alloy 600 issues. Companion Guide to the ASME Boiler & Pressure Vessel Code, 2009, 3.
[2] Bamford W, Hall J. Cracking of alloy 600 nozzles and welds in PWRs: review of cracking events and repair service experience//12th International Conference on Environmental Degradation of Materials in Nuclear Power System–Water Reactors. 2005: 959-966.
[3] Ramirez A J, Sowards J W, Lippold J C. Improving the ductility-dip cracking resistance of Ni-base alloys. J. Mater. Process. Tech, 2006, 179(1): 212-218.
[4] Mo W, Lu S, Li D, et al. Effects of filler metal composition on inclusions and inclusion defects for ER NiCrFe-7 weldments. J. Mater. Sci. Tech, 2013, 29(5): 458-466.
[5] DuPont J N, Robino C V, Marder A R. Solidification and weldability superalloys. Weld. J, 1998.
[6] Tsungyuan Kuo, Hwa teng Lee, et al. An Evaluation of the Effects of Nb and Mn Addition on Nickel-Base Weldments. Sci. Technol. Weld. Joi, 2003,1(8):39-48.
[7] Renyao Qin, Huang Wang, et al. Investigation on the Microstructure and Ductility-Dip Cracking susceptibility of the Butt Weld Welded with ENiCrFe-7 Nickel-base Alloy-Covered Electrodes, Metall. Mater. Trans. A, 46A (2014) 1227-1236.
[8] B.C. Kim, S. Lee, et al. In situ Fracture observations on tempered martensite embrittlement in an AISI 4340 steel. Metall. Trans. A, 22A (1991) 1889-1892.
[9] Byeongho Kim, Jeonghyeon Do, et al. In situ fracture observation and fracture toughness analysis of squeeze cast AZ51-χSn magnesium alloys. Mater. Sci. Eng. A, 527 (2010) 6745-6757.
[10] X.Y. Cao, P. Zhu, et al. An investigation on microstructure and mechanical property of thermally aged stainless steel weld overlay cladding. J. Nucl. Mater, 496 (2017) 172-182.
[11] Tae-Hyuk Lee, Ho-Young Suh, et al. Effect of a heat treatment on the precipitation behavior and tensile properties of alloy 690 steam generator tubes. J. Nucl. Mater, 479 (2016) 85-92.
[12] Y. M. He, J. G. Yang, et al. Effect of high-temperature aging on microstructure and mechanical properties of Ni-Mo-Cr based superalloy subjected to simulated heat-affected zone thermal cycle. J. Alloy. Compd, 660 (2016) 266-275.
[13] Yifeng Li, Jianqiu Wang, En-Hou Han. Characterization of ferroniobium topologically close-packed phase inclusion in nickel-based 152 cladding of dissimilar metal welds. J. Nucl. Mater, 515 (2019) 267-275.
[14] Yifeng Li, Jianqiu Wang, En-Hou Han, et al. Structural, mechanical and corrosion studies of Cr-rich inclusions in 152 cladding of dissimilar metal weld joint. J. Nucl. Mater, 498 (2018) 9-19.
[15] Dinesh W. Rathod, Sunil Pandey, et al. Mechanical properties variations and comparative analysis of dissimilar metal pipe welds in pressure vessel system of nuclear plants. J. Pressure Vessel Tech, 138 (2016) 1-9.
[16] H. T. Lee, S. L. Jeng, T. Y. Kuo. The Microstructure and Fracture behavior of the dissimilar Alloy 690-SUS 304L joint with various Nb addition, Metall. Trans. A, 34 (2001) 1097-2003.
[17] Yuan Hao, Ma Chengyong, et al. Influence of Nb on microstructure and mechanical properties of ENiCrFe-7 weld metal of 690 Ni-based alloy welding rod, Heat. Treat. Met, 42 (2017) 16-20.
[18] Yuan Hao, Ma Chengyong, et al. Research of the microstructure and properties of ENiCrFe-7 weldments, Mater. Sci. Tech, 24 (2016) 41-46.
[19] Xue Xiao-yuai, Li Zhi-yuan, Wang Zhi-ying, et al, Effect of postweld heat treatment on microstructure and properties of stainless steel surfacing layer of CAP1400 evaporator pressure boundary weld,T. Mater. Heat. Treat, 39(2018)108-112.
[20] Fan Yindong, Huang Yifang, Effect of heat treatment holding time on mechanical properties of deposited metal of low-alloy steel electrode CHE608HR for nuclear equipment, Elec. Weld. Mach, 49(2019)164-167.
[21] Gang Li, Maolong Zhang, et al, A comparative study on microstructure and properties of Inconel 52M overlays deposited by laser beam and GTA cladding, Int. J. Adv. Manuf. Technol, 81 (2015), 103-112.
[22] P.L. Guo, L.G. Ling, Z.R. Chen, et al, Effect of heat treatment on the microstructure and corrosion resistance behavior of ENiCrFe-7 weld overlay cladding material, J. Nucl. Mater, 527(2019)151786.
[23] Xiang Xin, Chen Changan, et al, Effect of Fe and C Doping on the Lattice Distortion of He Ion Implanted Al Surface by XRD, Rare. Metal. Mater. Eng, 40 (2011) 1610-1615.
[24] Lee H T, Jeng S L, Kuo T Y. The Microstructure and Fracture behavior of the dissimilar alloy 690-SUS 304L joint with various Nb addition[J]. Metall. Mater. Trans. A, 2001, 34A: 2003-1097.
[25] Murakami T, Sasaki S, Ichikawa K, et al. Oxidation resistance of powder compacts of the Nb–Si–Cr system and Nb3Si5Al2 matrix compacts prepared by spark plasma sintering, Intermetall, 9 (2001) 629–635.
[26] S. L. Jeng, H. T. Lee, et al, Effects of Nb on the microstructure and elevated-temperature mechanical properties of Alloy 690-SUS 304L dissimilar welds, Mater. Trans, 49 (2008) 1270-1277.
[27] L. Y. Wu, K. Y. Luo, et al, Effects of laser shock peening on the micro-hardness, tensile properties, and fracture morphologies of CP-Ti alloy at different temperatures, Appl. Surf. Sci, 431 (2018) 122-134.
[28] Huang J Y, Yung T Y, Huang J S, et al. Effects of heat treatment and chromium content on the environmentally assisted cracking behavior of the dissimilar metal welds in simulated BWR coolant environments[J]. Corros. Sci, 2013, 75: 386-399.