Recombinant Plasmodium falciparum CSP production. For the design of the recombinant protein of P. falciparum CSP (rPfCSP), we used the sequence proposed by Stoute et al. (1997)20 present in commercial malaria vaccine RTS´S. The synthetic gene was produced by the Thermofisher company. It presents an improvement of the codons for expression in E. coli and was inserted in pRSET “A” expression vector. The expression and purification of the recombinant protein were carried out following the methodology described by Souza et al. (2014)21. The E. coli BL21 (DE3) pLysS strain was transformed with this construction and induced to produce the recombinant protein using IPTG (isopropyl β-D-1-thiogalactopyranoside), at a final concentration of 1 mM, for 3 h at 37°C in Lurian Bertani medium, containing the antibiotics chloramphenicol (11.4 ug/mL) and ampicillin (100ug/mL). Protein purification was performed using the NTA nickel column (QIAGEN), following the guidelines described by the manufacturer. In order to analyze the expression and purification of the rPfCSP protein, SDS-PAGE was performed following the protocol of Maniatis et al. (1989). Protein mass in SDS-PAGE was determined using the iBright analysis software (Thermo Fisher Connect™). After purification, immunoblots were performed using rPfCSP on a nitrocellulose membrane, and a monoclonal antibody (mAb) for detection of the 6xHis tag (recognized sequence HHHHHHG, Sigma-Aldrich, cat. No. MA1-21315) and an mAb against P. falciparum CSP (recognized sequence NANPNVDPNANP, kindly provided by BEI Resources, cat. No. MRA-183A 2A10), as the primary antibody. Developing was performed using an anti-IgG mouse coupled with horseradish peroxidase (KPL, cat. No. 215–1802) and 3,3'-diaminobenzidine (DAB, Sigma-Aldrich. cat. No. D7304).
Preparation and quantification of B. subtilis spores. The spores of Bacillus subtilis, strain KO7, were obtained by the nutrient exhaustion method, using Difco sporulation medium, at 37 ºC, under constant agitation for 72 h. Afterwards, the spores were centrifuged at 4,000 rpm for 20 min, washed twice with Milli-Q water, and left for 16 h at 4°C. The sample was deactivated by autoclaving at 121°C, for 45 min. Spore quantification was performed by flow cytometry using FACSCanto (BD) and a Trucount kit (BD), following the manufacturer’s guidelines and the method described in Patent US20040023319A1 (supplementary Fig. 1).
Coupling of r Pf CSP to the spores’ surface. Coupling was performed according to the method described by Falahati-pour et al.22. The B. subtilis spores at 1x108 were resuspended with 250 µL of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) (5 µg/ml) and left at room temperature for 15 minutes. Then, 250 µL of N-hydroxysuccinimide (NHS) (5 µg/ml) were added, and the sample was incubated at 4 ºC for 30 minutes under agitation. Afterwards, the samples were centrifuged and placed in contact with 10 µg of rPfCSP for 16 h at room temperature, under constant agitation. Subsequently, the spores were then washed 3 times with 0.01 M phosphate saline buffer (PBS), and finally resuspended in 600 µL of PBS, and were stored at 4°C until the moment of use. The dot blot method was used to quantify the remaining protein in the supernatant after the coupling assay. A curve with varying amounts of supernatant of the rPfCSP + SBsKO7 coupled sample (25 µl, 12 µl, 6 µl, 3 µl), as well as dilutions of purified rPfCSP protein (2 µg; 1 µg; 0.5 µg; 0.25 µl; 0.125 µl; 0.06 µl) to be used as the standard, were applied under vacuum to the nitrocellulose membrane (Amersham™ Protran®) using the Bio-Dot device (BIO-RAD). The nitrocellulose membrane was blocked in 5% bovine serum albumin BSA solution dissolved in PBS 1x for 1 h at room temperature. The membrane was subjected to washings with PBS 1x-Tween 80 at 0.05% and incubations with anti-CSP monoclonal antibody (BEI Resources, cat. No. MRA-183A 2A10) at a 1:1000 ratio and anti-mouse IgG secondary antibody conjugated to phosphatase alkaline (Phosphatase-KPL) in the proportion 1:10000 for 1 h. Detection was performed with the chromogen of the WesternBreeze® kit (Thermo-Fisher Scientific) following the manufacturer’s recommendations. Sample quantification was obtained after scanning and analyzing the membrane image using the program iBright analysis software (Thermo Fisher Connect™). Based on a protein concentration curve, it was determined the total amount of remaining rPfCSP in the specific volume of supernatant. Subtracting the original amount of protein used (10 µg) and the remaining amount, it was determined the average percentage of protein which coupled to Bacillus subtilis spore surface.
Nasal Immunization The nasal immunization regime and experimental design was based on Santos et al. (2020)13, with some alterations made by our group. A total of 25 female animals (Mus musculus Balb/c) were used and divided into 5 groups containing 5 animals in each: (1) 10 µg rPfCSP coupled to B. subtilis spores at 1x108 (rPfCSP + SBsKO7); (2) only 10 µg rPfCSP; (3) Immunization only with spores of B. subtilis 1x108(SBsKO7); (4) Immunization only with 0.01 M PBS; and (5) Unimmunized mice. Mice were intranasally vaccinated on days 0, 14 and 21 of the experiment. The study was authorized by the Ethics Committee on Animal Use of the National Institute for Amazonian Research (CEUA-INPA) under number 031/2018 according to international recommendations for ethics in animal experimentation (ARRIVE guidelines) and by guidelines for animal use and care based on the standards established by National Council for the Control of Animal Experimentation (CONCEA). Enzymatic linked immunosorbent assays (ELISA) were used for the evaluation of the humoral response. For this, blood samples were collected on days zero (D0), D14, D21 and D35 in all groups, and D50, D100, D150, D200 and D250 in groups that presented antibody titers detected by ELISA until D35 (Fig. 2A).
Indirect ELISA. 96-well plates were sensitized with rPfCSP, which was diluted in carbonate buffer (pH 9.6) and incubated overnight at 4 ºC. Next, plates were washed with 0.01 M PBS/0.05% of Tween 20, and the wells were blocked using 10 mM PBS/2.5% BSA at 37 ºC, for 1 hour. The mice sera were diluted at 1:100 in 10 mM PBS/2.5 % BSA, which was added to the wells, and incubated at 37 ºC for 1 h. Then, the plates were washed 4 times with 10 mM PBS/0.05% Tween 20, and the secondary antibody (anti-IgG mouse HRP conjugate, ZyMax) was added at 1:2000 dilution, and subsequently incubated at 37 ºC, for 1 h. The plates were washed again, and the development was carried out with a chromogenic substrate (Scienco One Step – TMB), which was added to each well for 20 minutes. Finally, the reaction was interrupted with H2SO4 (2M). The optical density (OD) was determined using an ELISA plate reader (Molecular Devices-FlexStation 3) with a 450 nm filter. The same procedure was performed for the detection of IgG antibody subclasses, and the secondary antibody was replaced with isotype-specific antibodies against mouse IgG1, IgG2a, IgG2b and IgG3 (Sigma-Aldrich®), which was diluted according to the manufacturer’s instructions.
Statistical analysis. The results were analyzed using the mixed linear models in order to determine the variations between the groups of animals. All analyses were performed using R software version 4.0.2, and R studio version 1.1.4. The significance level considered was p < 0.05.