1. Echrif, S. and M. Hrairi, Research and Progress in Incremental Sheet Forming Processes. Materials and Manufacturing Processes, 2011. 26: p. 1404-1414.
2. J Jesweit, F.M., G Hirt, A Bramley, J Duflou, Asymmetric Single Point Incremental Forming of Sheet Metal. CIRP Annals - Manufacturing Technology 2005. 54(2): p. 623-649.
3. Leszak, E., Apparatus and Process for Incremental Dieless Forming. 1967: United States. p. 19.
4. Emmens, W.C., G. Sebastiani, and A.H. van den Boogaard, The technology of Incremental Sheet Forming—A brief review of the history. Journal of Materials Processing Technology, 2010. 210(8): p. 981-997.
5. Mason B, A.E. Sheet metal forming for small batches using sacrificial tooling. in 3rd Int. Conf. On rotary metalworking. 1984. Kyoto, Japan.
6. H. Iseki, K.K., S. Sakamoto. Flexible and Incremental Sheet Metal Forming Using a Spherical Roller. in JJCTP. 1989.
7. Iseki, H., Shioura, T., Satou, K. Practical development of press-molding machine with small punching tool. in Proceedings 5th ICTP. 1996. Columbus, OH,USA.
8. Filice L, F.L., Micari F, Analysis of Material Formability in Incremental Forming. CIRP ann Manufacturing Technology, 2002. 51(1): p. 199–202.
9. Jeswiet, J., Incremental single point forming. Transactions of North American Manufacturing Research Institute, 2000. 29: p. 75-79.
10. H.Amino, Y.L., S.Ozawa,K.Fukuda,T.Maki. Dieless forming of automotive service panels. in Proc. 7th ICTP. 2002. Yokohama, Japan.
11. Allwood, J., D. Shouler, and A. Tekkaya, The Increased Forming Limits of Incremental Sheet Forming Processes. Key Engineering Materials - KEY ENG MAT, 2007. 344: p. 621-628.
12. Silva, M.B., et al., Single‐point incremental forming and formability—failure diagrams. 2008. 43(1): p. 15-35.
13. Li, Y., W.J.T. Daniel, and P.A. Meehan, Deformation analysis in single-point incremental forming through finite element simulation. The International Journal of Advanced Manufacturing Technology, 2017. 88(1): p. 255-267.
14. Kurra, S. and S.P. Regalla, Experimental and numerical studies on formability of extra-deep drawing steel in incremental sheet metal forming. Journal of Materials Research and Technology, 2014. 3(2): p. 158-171.
15. Bagudanch, I., et al., Forming Force in Single Point Incremental Forming under Different Bending Conditions. Procedia Engineering, 2013. 63: p. 354-360.
16. Aggarwal, S., N. Nešić, and P. Xirouchakis, Cutting torque and tangential cutting force coefficient identification from spindle motor current. The International Journal of Advanced Manufacturing Technology, 2013. 65(1): p. 81-95.