Azami A, Yacoub T, Curran JH (2012) Effects of strength anisotropy on the stability of slopes. In: GeoManitoba 2012.

Bear J (1972) Dynamics of Fluids in Porous Media. Amsterdam: Elsevier.

Bobet A, Fakhimi A, Johnson S, Morris J, Tonon F, Yeung MR (2009) Numerical models in discontinuous media: review of advances for rock mechanics applications. J Geotech Geoenvirn Engng 135(11):1547–61.

Cai M, Kaiser PK, Uno H, Tasaka Y, Minami M (2004) Estimation of rock mass deformation modulus and strength of jointed hard rock masses using the GSI system. Int J Rock Mech Min Sci 41(1):3–19.

Cundall P, Pierce ME, Mas Ivars D (2008) Quantifying the size effect of rock mass strength. In: Proc. 1st Southern Hemisphere International Rock Mechanics Symposium, pp. 3–15, Perth: Australian Centre for Geomechanics.

Da Cunha AP (1990) Scale effects in rock masses. Pinto da Cunha A (ed) Proceedings of the First International Workshop on Scale Effects in Rock Masses, Loen, 7–8 June 1990.

Das R, Singh TN (2021a) Effect of rock bolt support mechanism on tunnel deformation in jointed rockmass: a numerical approach. Underground Space, doi: 10.1016/j.undsp.2020.06.001

Das R, Singh TN (2021b) Effect of closely spaced, non-persistent ubiquitous joint on tunnel boundary deformation: a case study from Himachal Himalaya. Geotechnical and Geological Engineering, 39, 2447–2459.

Dawson EM, Roth WH, Drescher A (1999) Slope stability analysis by strength reduction. Geotechnique 49(6): 835–40.

Deere DU, Peck RB, Monsees JE, Schmidt B (1969) Design of tunnel liners and support systems. Office of High-Speed Ground Transportation, US Department of Transportation, PB 183799.

Dershowitz WS, La Pointe PR, Doe T (2000) Advances in discrete fracture network modeling. In: Proc. of the US EPA/NGWA Fractured Rock Conference - info.ngwa.org, pp. 882 – 94.

Eberhardt E., Stead D., Coggan J.S. (2004). Numerical analysis of initiation and progressive failure in natural rock slopes-the 1991 Randa rockslide. Int J Rock Mech Min Sci 41:69–87.

Esmaieli K, Hadjigeorgiou J, Grenon M (2010) Estimating geometrical and mechanical REV based on synthetic rock mass models at Brunswick Mine. Int J Rock Mech Min Sci 47(6):915–26.

Goodman RE, Shi GH (1985) Block theory and its application to rock engineering. London: Prentice-Hall, 338 pp.

Gupta V, Bhasin RK, Kaynia AM, Kumar V, Saini AS, Tandon RS, Pabst T (2016) Finite element analysis of failed slope by shear strength reduction technique: a case study for Surabhi Resort Landslide, Mussoorie township, Garhwal Himalaya. Geomatics, Natural Hazards and Risk 7(5):1677–90.

Hammah RE, Yacoub T, Corkum B, Curran JH (2008) The practical modelling of discontinuous rock masses with finite element analysis. In: 42nd US Rock Mechanics Symposium, pp. 56–63.

Hammah RE, Yacoub T, Curran JH (2009) Variation of failure mechanisms of slopes in jointed rock masses with changing scale. In: 3rd CANUS Rock Mechanics Symposium (Paper No. 3956). Toronto.

Heuze FE (1980) Scale effects in the determination of rock mass strength and deformability. Rock Mechanics Felsmechanik Mecanique Des Roches, 12 (3–4):167–92.

Hill R (1963) Elastic properties of reinforced solids: some theoretical principles. Journal of the Mechanics and Physics of Solids 11:357–72.

Hoek E, Brown ET (1980) Underground Excavation in Rock. The Institution of Mining and Metallurgy, London.

Hoek E, Brown ET (1997) Practical estimates of rock mass strength. Int J Rock Mech Min Sci 34(8):1165–86.

Hoek E, Brown ET (2019) The Hoek–Brown failure criterion and GSI – 2018 edition. Journal of Rock Mechanics and Geotechnical Engineering, 11(3):445–463.

Hoek E, Kaiser PK, Bawden WF (1995) Support of Underground Excavations in Hard Rock.

Huang H, Shen J, Chen Q, Karakus M (2020). Estimation of REV for fractured rock masses based on Geological Strength Index. International Journal of Rock Mechanics and Mining Sciences, 126, 104179.

Hudson JA, Harrison JP (1997) Engineering rock mechanics. Oxford: Elsevier.

John KW (1969) A civil engineering approach to evaluate strength and deformability of regularly jointed rock. 11th Int. Symp. on Rock Mech. pp. 69–80.

Lama RD, Vutukuri VS (1978) Handbook on properties of rocks. Berlin: Borntraeger.

Liu X, He S, Wang D (2020) Numerical analysis of the anisotropy and scale effects on the strength characteristics of defected rockmass. Advances in Civil Engineering, 2020, 1–21.

Long JCS, Remer JS, Wilson CR, Witherspoon PA (1982) Porous media equivalents for networks of discontinuous fractures. Water Resour Res 18(3):645–58.

Martin CD, Kaiser PK, McCreath DR (1999) Hoek-Brown parameters for predicting the depth of brittle failure around tunnels. Canadian Geotechnical Journal 36(1), 136–151.

Mas Ivars D (2010) Bonded Particle Model for Jointed Rock Mass. Ph.D. Thesis, KTH-Engineering Geology and Geophysics Research Group, Royal Institute of Technology (KTH).

Mas Ivars D, Pierce ME, Darcel C, Reyes-Montes J, Potyondy DO, Paul Young R, Cundall PA (2011) The synthetic rock mass approach for jointed rock mass modelling. Int J Rock Mech Min Sci 48(2):219–44.

Min KB, Jing L (2003) Numerical determination of the equivalent elastic compliance tensor for fractured rock masses using the distinct element method. Int J Rock Mech Min Sci 40(6):795–816.

Mutschler T, Natau O (1991) Further developments for the determination of the stress-strain behavior of jointed rock mass by large-scale tests. Proc. of 7th ISRM Congress, Aachen, pp. 1557–1560.

Ning Y, Xu WY, Zheng WT, Meng GT, Shi AC, Wu GY (2008) Study of random simulation of columnar jointed rock mass and its representative elementary volume scale. Chin J Rock Mech Eng 27:1202–08.

Oda M (1988) A method for evaluating the representative elementary volume based on joint survey of rock masses. Canadian Geotechnical Journal 25(3):440–7.

Palmström A (1995) RMi - A rock mass characterization system for rock engineering purposes. Doctoral dissertation, University of Oslo.

Pariseau WG, Puri S, Schmelter SC (2008) A new model for effects of impersistent joint sets on rock slope stability. Int J Rock Mech Min Sci 45(2):122–31.

Rocscience Inc. (2018). RS2 (Version 9.0) Finite element analysis for underground excavations and slopes. Rocscience Inc. Toronto, Canada. http://www.rocscience.com.

Rocha M, Da Silva JN (1970) A new method for determination of deformability of rock masses. Proceedings of 2nd Congress on Rock mechanics, International Society for Rock mechanics, Belgrade, pp. 2–21.

Roosta RM, Sadaghiani MH, Pak A (2005) Strength reduction technique in stability analysis of jointed rock slopes. International Journal of Civil Engineering 3(3–4):152–65.

Sainsbury BL, Sainsbury DP (2017) Practical use of the ubiquitous-joint constitutive model for the simulation of anisotropic rock masses. Rock Mech Rock Engng 50(6):1507–28.

Salmi EF (2019) Researchgate answer submitted to question "Is there any need for up-scaling lab rock mechanical properties to field properties in petroleum geomechanics?", Accessed 20 March 2019.

Sari M (2019) Stability analysis of cut slopes using empirical, kinematical, numerical and limit equilibrium methods: case of old Jeddah-Mecca road (Saudi Arabia). Environmental Earth Sciences 78(21):621

Schultz RA (1996) Relative scale and the strength and deformability of rock masses. Journal of Structural Geology 18(9):1139–49.

Shen J, Karakus M (2014) Three-dimensional numerical analysis for rock slope stability using shear strength reduction method. Canadian Geotechnical Journal 51(2):164–72.

Shi G-H (1993) Block system modeling by discontinuous deformation analysis. Computational Mechanics Publications, Southampton UK.

Song SY, Sun FY, Chen JP, Zhang W, Han XD, Zhang XD (2017) Determination of RVE size based on the 3D fracture persistence. Q J Engng Geol Hydrogeol 50:60–8.

Wang X, Zhao Y, Lin X (2011) Determination of mechanical parameters for jointed rock masses. J Rock Mech Geotech Engng 3:398–406.

Wu Q, Kulatilake PHSW (2012) REV and its properties on fracture system and mechanical properties, and an orthotropic constitutive model for a jointed rock mass in a dam site in China. Computers and Geotechnics 43:124–42.

Yoshinaka R, Osada M, Park H, Sasaki T, Sasaki K (2008) Practical determination of mechanical design parameters of intact rock considering scale effect. Engineering Geology 96(3–4):173–86.

Zhang W, Chen J, Liu C, Huang R, Li M, Zhang Y (2012) Determination of geometrical and structural representative volume elements at the Baihetan Dam site. Rock Mech Rock Engng 45(3):409–19.