[1] Basak, I.; Ghosh, A, “Mechanism of spark generation during electrochemical discharge machining: a theoretical model and experimental verification”, Journal of MaterialsProcessing Technology, 62, 46-53, DOI:10.1016/0924-0136(95)02202-3, 1996.
[2] Bhattacharyya, B.; Doloi, B.; Sorkhel, S.K, “Experimental investigations into electrochemical discharge machining (ECDM) of non-conductive ceramic materials”, Journal of Materials Processing Technology, 95, 145-154, DOI:10.1016/S0924-0136(99)00318-0, 1999.
[3] Wüthrich, R.; Fascio, V, “Machining of non-conducting materials using electrochemical discharge phenomenon—an overview”, International Journal of Machine Tools & Manufacture, 45(9), 1095–1108, DOI: 10.1016/j.ijmachtools.2004.11.011, 2005.
[4] Sarkar, B.R.; Doloi, B.; Bhattacharyya, B, “Parametric analysis on electrochemical discharge machining of silicon nitride ceramic”, International Journal Advanced Manufacturing Technology, 28(9), 873-881, DOI: 10.1007/s00170-004-2448-1, 2006.
[5] Kim, D.J., Ahn, Y., Lee, S.H. and Kim, Y.K, “Voltage pulse frequency and duty ratio effects in an electrochemical discharge micro-drilling process of Pyrex glass”, International Journal of Machine Tools & Manufacture, 46, 1064-1067, DOI:10.1016/j.ijmachtools.2005.08.011, 2006.
[6] Yan, B. H., Yang, C. T., Huang, F. Y. and Lu, Z. H, “Electrophoretic deposition grinding (EPDG) for improving the precision of microholes drilled via ECDM”, Journal of Micromechanics & Microengineering, 17, 376–383,DOI:https://doi.org/10.1088/0960-1317/17/2/025, 2007.
[8] Sarkar B.R.; Doloi B.; Bhattacharyya B,“Investigation into the influences of the power circuit on the micro-electrochemical discharge machining process”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223 (2), 133 –144,DOI:10.1243/09544054JEM1258, 2009.
[9] Han, M. S.; Min, B. K; Lee, S. J,“Geometric improvement of electrochemical discharge micro-drilling using an ultrasonic-vibrated electrolyte”, Journal of Micromechanics & Micro engineering, 19, 065004 (8pp),DOI:10.1088/09601317/19/6/065004, 2009.
[10] Cheng, C. P., Wu, K. L., Mai, C. C., Hsu, Y. S. and Yan, B. H., “Magnetic field-assisted electrochemical discharge machining”, Journal of Micromechanics &Microengineering,20, 075019 (7pp)DOI: 10.1088/0960-1317/20/7/075019, 2010.
[11] Liu, J. W., Yue, T. M., Guo, Z. N,“An analysis of the discharge mechanism in electro chemical discharge machining of particulate reinforced metal matrix composites”,International Journal of Machine Tools & Manufacture, 50, 86–96,DOI: 10.1016/j.ijmachtools.2009.09.004, 2010.
[12] Yang, C.-K., Cheng, C.-P., Mai, C.-C., Wang, A. C., Hung, J.-C., Yan, B.-H, “Effect of surface roughness of tool electrode materials in ECDM performance”, International Journal of Machine Tools & Manufacture, 50, 088-1096 DOI: 10.1016=j.ijmachtools.2010.08.006, 2010.
[13] Cheng C. P., Wu, K. L, Mai, C. C., Yang, C. K., Hsu, Y. S., Yan, B. H, “Study of gas film quality in electro-chemical discharge machining”, International Journal of Machine Tools & Manufacture, 50, 689–697,DOI: 10.1016/j.ijmachtools.2010.04.012, 2010.
.
[14] Cao, X. D., Kim, B. Y. and Chu, C. N,“Hybrid Micromachining of Glass using ECDM and Micro Grinding”, International Journal of Precision Engineering and Manufacturing, 14 (1), 5-10, DOI: 10.1007/s12541-013-0001-6, 2013.
[15] Gupta, P.K.;Dvivedi, A.; Kumar, P,“Effect of Pulse Duration on Quality Characteristics of Blind Hole Drilled in Glass by ECDM”, Materials and Manufacturing Processes, 0: 1–9. DOI: 10.1080/10426914.2015.1103857, 2016.
[16] Hajian, M.; Razfar, M.R.; Movahed, S.“An experimental study on the effect of magnetic field orientations and electrolyte concentrations on ECDM milling performance of glass”, Precision Engg., 45, 322-331, DOI: 10.1016/j.precisioneng.2016.01.007, 2016.
[17]Saranya, S.; Nair, A.; Ravi Sankar, A., “Experimental investigations on the electrical and 2D-machining characteristics of an electrochemical discharge machining (ECDM) process”, Microsystem Technologies, 22, 1-9, DOI 10.1007/s00542-016-3027-8, 2016.
[18] A. Behroozfar and M. R. Razfar,“Experimental Study of the Tool Wear During the Electrochemical Discharge Machining” Materials and Manufacturing Processes, 31: 574–580, DOI: 10.1080/10426914.2015.1004685, 2016.
[20] J. Bindu Madhavi, Somashekhar S. Hiremath, “Machining and Characterization of Channels and Textures on Quartz Glass Using μ-ECDM Process”, S.S. Silicon,1-13,DOI:http://dx.doi.org/10.1007/s12633-019-0083-6, 2019.
[21] Bellubbi, S., N, S. & Mallick, B, “Multi Response Optimization of ECDM Process Parameters for Machining of Micro channel in Silica Glass Using Taguchi–GRA Technique”. Silicon (2021). https://doi.org/10.1007/s12633-021-01167-4, 2021.