Gerdes MH, Witte AM, Jeitschko W, et al. Magnetic and Electrical Properties of a New Series of Rare Earth Silicide Carbides with the Composition R3Si2C2 (R = Y, La–Nd, Sm, Gd–Tm). J Solid State Chem. 1998, 138: 201-206.
 Jeitschko W, Gerdes MH, Witte AM, et al. Subcell Structure and Two Different Superstructures of the Rare Earth Metal Silicide Carbides Y3Si2C2, Pr3Si2C2, Tb3Si2C2, and Dy3Si2C2. J. Solid State Chem 2001, 156 :1-9.
 Zhou YC, Xiang HM, Dai FZ, Y5Si3C and Y3Si2C2: Theoretically predicted MAX phase like damage tolerant ceramics and promising interphase materials for SiCf/SiC composites. J Mater Sci Technol 2019, 35: 313-322.
 Xu K, Zou H, Chang K, et al. Thermodynamic description of the sintering aid system in silicon carbide ceramics with the addition of yttrium. J Eur Ceram Soc 39 2019, 15: 4510-4519.
 Shao JQ, Li M, Chang KK, et al. Fabrication and characterization of SPS sintered SiC-based ceramic from Y3Si2C2-coated SiC powders. J Eur Ceram Soc 2018, 38: 4833-4841.
 Liu JW, Zhou XB, Tatarko P, et al. Fabrication, microstructure, and properties of SiC/Al4SiC4 multiphase ceramics via an in-situ formed liquid phase sintering. J Adv Ceram 2020, 9: 193-203.
 Zhou XB, Liu JW, Zou SR, et al. Almost Seamless Joining of SiC Using an In-situ Reaction Transition Phase of Y3Si2C2. J Eur Ceram Soc 2020, 40: 259-266.
 Chen H, Zhao B, Zhao ZF, et al. Achieving strong microwave absorption capability and wide absorption bandwidth through a combination of high entropy rare earth silicide carbides/rare earth oxides. J Mater Sci Technol 2020, 47: 216-222.
 Hrubovčáková M, Múdra E, Bureš R, et al. Microstructure, fracture behaviour and mechanical properties of conductive alumina based composites manufactured by SPS from graphenated Al2O3 J Eur Ceram Soc 2020, 40: 4818-4824.
 Marzieh E, Mohammad Z, Mansour R. The effect of temperature on the physical and mechanical properties of nanostructured boron nitride by spark plasma sintering. J Alloys Compds 2020, 835:
 Jiang RR, Li M, Yao YR, et al. Application of BIB polishing technology in cross-section preparation of porous, layered and powder materials: A review, Front. Mater Sci 2019, 13: 107-125
 Volz E, Roosen A, Hartung W, Winnacker A. Electrical and thermal conductivity of liquid phase sintered SiC. J Eur Ceram Soc 2001, 21: 2089-2093.
 Zou J, Zhang GJ, Fu ZY. In-situ ZrB2-hBN ceramics with high strength and low elasticity. J Mater Sci Technol 2020, 48: 186-193.
 Lapauw T, Halim J, Lu J, et al. Synthesis of the novel Zr3AlC2 MAX phase. J Eur Ceram Soc 2016, 36: 943-947.
 Munirw ZA, Quach DV, ohyanagi M, Electric Current Activation of Sintering: A Review of the Pulsed Electric Current Sintering Process. J Am Ceram Soc 2011, 94: 1-19.
 Zhao GR, Chen JX, Li YM, et al. In situ synthesis, structure, and properties of bulk nanolaminate YAl3C3 ceramic. J Eur Ceram Soc 2017, 37: 83-89.
 Barsoum MW, The MN+1AXN phases: a new class of solids: Thermodynamically Stable Nanolaminates. Prog Solid State Chem 2000, 28: 201-281.
 Tzenov NV, Barsoum MW, Synthesis and characterization of Ti3AlC2. J Am Ceram Soc 2000, 83: 825-832.
 Zhang L, Feng J, Pan W. Vacuum sintering of transparent Cr:Y2O3 ceramics. Ceram Inter 2015, 41: 8755-8760.
 Ahmadi B, Reza SR, Ahsanzadeh-Vadeqani M, et al. Mechanical and optical properties of spark plasma sintered transparent Y2O3 ceramics. Ceram Inter 2016, 42: 17081-17088.
 Yeheskel O, Tevet O. Elastic moduli of transparent yttria. J Am Ceram Soc 1999, 82: 136-144.
 Zhou XB, Jing L, Kwon YD, et al. Fabrication of SiCw/Ti3SiC2 composites with improved thermal conductivity and mechanical properties using spark plasma sintering. J Adv Ceram 2020, 9: 462-470.
 Tatarko P, Chlup Z, Mahajan A, et al. High temperature properties of the monolithic CVD β-SiC materials joined with a pre-sintered MAX phase Ti3SiC2 interlayer via solid-state diffusion bonding. J Eur Ceram Soc 2017, 37: 1205-1216.
 Yi Q, Zhou SM, Teng H, et al. Structural and optical properties of Tm:Y2O3 transparent ceramic with La2O3, ZrO2 as composite sintering aid. J Eur Ceram Soc 2012, 32: 381-388.