[1] J.M.D. Coey, Permanent magnet applications, Journal of Magnetism and Magnetic Materials 248 (2002) 441–456. https://doi.org/10.1016/S0304-8853(02)00335-9.
[2] O. Gutfleisch, M.A. Willard, E. Brück, C.H. Chen, S.G. Sankar, J.P. Liu, Magnetic materials and devices for the 21st century: stronger, lighter, and more energy efficient, Advanced materials (Deerfield Beach, Fla.) 23 (2011) 821–842. https://doi.org/10.1002/adma.201002180.
[3] J. Fischbacher, A. Kovacs, M. Gusenbauer, H. Oezelt, L. Exl, S. Bance, T. Schrefl, Micromagnetics of rare-earth efficient permanent magnets, Journal of Physics D: Applied Physics 51 (2018) 193002. https://doi.org/10.1088/1361-6463/aab7d1.
[4] O. Gutfleisch, Controlling the properties of high energy density permanent magnetic materials by different processing routes, Journal of Physics D: Applied Physics 33 (2000) R157-R172. https://doi.org/10.1088/0022-3727/33/17/201.
[5] M. Duerrschnabel, M. Yi, K. Uestuener, M. Liesegang, M. Katter, H.-J. Kleebe, B. Xu, O. Gutfleisch, L. Molina-Luna, Atomic structure and domain wall pinning in samarium-cobalt-based permanent magnets, Nature communications 8 (2017) 54. https://doi.org/10.1038/s41467-017-00059-9.
[6] W. Rodewald, B. Wall, M. Katter, K. Uestuener, Top Nd-Fe-B magnets with greater than 56 MGOe energy density and 9.8 kOe coercivity, IEEE Trans. Magn. 38 (2002) 2955–2957. https://doi.org/10.1109/TMAG.2002.803075.
[7] M. Liesegang, R. Regnat, K. Uestuener, F.-J. Boergermann, M. Katter, Influence of the Sample Position on the Measured Magnetic Flux in Helmholtz Coils Biased with Halbach Array Systems, International Workshop on Rare-Earth and Future Permanent Magnets and their Applications, Darmstadt, 2016.
[8] M. Haavisto, S. Tuominen, T. Santa-Nokki, H. Kankaanpää, M. Paju, P. Ruuskanen, Magnetic Behavior of Sintered NdFeB Magnets on a Long-Term Timescale. Advances in Materials Science and Engineering, 2014, 1-7 (2014). https://doi.org/10.1155/2014/760584.
[9] R.S. Popovic, J.A. Flanagan, P.A. Besse, The future of magnetic sensors, Sensors and Actuators A: Physical 56 (1996) 39–55. https://doi.org/10.1016/0924-4247(96)01285-X.
[10] B. Chang, S. Bai, D. Du, H. Zhang, Y. Zhou, Studies on the micro-laser spot welding of an NdFeB permanent magnet with a low carbon steel, Journal of Materials Processing Technology 210 (2010) 885–891. https://doi.org/10.1016/j.jmatprotec.2010.01.021.
[11] S.K. Gharghan, R. Nordin, M. Ismail, Energy-efficient ZigBee-based wireless sensor network for track bicycle performance monitoring, Sensors (Basel, Switzerland) 14 (2014) 15573–15592. https://doi.org/10.3390/s140815573.
[12] C. Schott, R. Racz, F. Betschart, R.S. Popovic, A new two-axis magnetic position sensor, in: Proceedings of IEEE Sensors, IEEE, 12-14 June 2002, pp. 911–915.
[13] H. Raich, P. Blümler, Design and construction of a dipolar Halbach array with a homogeneous field from identical bar magnets: NMR Mandhalas. Concepts in Magnetic Resonance Part B: Magnetic Resonance Engineering, 23B(1), 16-25 (2004). https://doi.org/10.1002/CMR.B.20018.
[14] K.S. Cho, Viscoelasticity of Polymers: Theory and Numerical Algorithms, 1st ed., Springer Netherlands, Dordrecht, s.l., 2016.
[15] C.-W. Feng, C.-W. Keong, Y.-P. Hsueh, Y.-Y. Wang, H.-J. Sue, Modeling of long-term creep behavior of structural epoxy adhesives, International Journal of Adhesion and Adhesives 25 (2005) 427–436. https://doi.org/10.1016/j.ijadhadh.2004.11.009.
[16] W. Xi, W. Liu, R. Hu, Y. Yin, M. Yue, Property enhancement of bonded Nd-Fe-B magnets by composite adhesive design, Materials & Design 192 (2020) 108767. https://doi.org/10.1016/j.matdes.2020.108767.
[17] I.F. Villegas, Strength development versus process data in ultrasonic welding of thermoplastic composites with flat energy directors and its application to the definition of optimum processing parameters, Composites Part A: Applied Science and Manufacturing 65 (2014) 27–37. https://doi.org/10.1016/j.compositesa.2014.05.019.
[18] G. Harman, J. Albers, The Ultrasonic Welding Mechanism as Applied to Aluminum-and Gold-Wire Bonding in Microelectronics, IEEE Trans. Parts, Hybrids, Packag. 13 (1977) 406–412. https://doi.org/10.1109/TPHP.1977.1135225.
[19] F. Staab, F. Balle, Ultrasonic torsion welding of ageing-resistant Al/CFRP joints: Properties, microstructure and joint formation, Ultrasonics 93 (2019) 139–144. https://doi.org/10.1016/j.ultras.2018.11.006.
[20] F. Balle, G. Wagner, D. Eifler, Ultrasonic Metal Welding of Aluminium Sheets to Carbon Fibre Reinforced Thermoplastic Composites, Adv. Eng. Mater. 11 (2009) 35–39. https://doi.org/10.1002/adem.200800271.
[21] F. Balle, D. Eifler, Statistical test planning for ultrasonic welding of dissimilar materials using the example of aluminum-carbon fiber reinforced polymers (CFRP) joints, Mat.-wiss. u. Werkstofftech 43 (2012) 286–292. https://doi.org/10.1002/mawe.201200943.
[22] F. Staab, M. Liesegang, F. Balle, Local shear strength distribution of ultrasonically welded hybrid Aluminium to CFRP joints, Composite Structures 248 (2020) 112481. https://doi.org/10.1016/j.compstruct.2020.112481.
[23] J. Magin, F. Balle, Solid state joining of aluminum, titanium and their hybrids by ultrasonic torsion welding, Mat.-wiss. u. Werkstofftech 45 (2014) 1072–1083. https://doi.org/10.1002/mawe.201400355.
[24] H.T. Fujii, Y. Goto, Y.S. Sato, H. Kokawa, Microstructure and lap shear strength of the weld interface in ultrasonic welding of Al alloy to stainless steel, Scripta Materialia 116 (2016) 135–138. https://doi.org/10.1016/j.scriptamat.2016.02.004.
[25] S. Shimizu, H.T. Fujii, Y.S. Sato, H. Kokawa, M.R. Sriraman, S.S. Babu, Mechanism of weld formation during very-high-power ultrasonic additive manufacturing of Al alloy 6061, Acta Materialia 74 (2014) 234–243. https://doi.org/10.1016/j.actamat.2014.04.043.
[26] T. Watanabe, H. Sakuyama, A. Yanagisawa, Ultrasonic welding between mild steel sheet and Al–Mg alloy sheet, Journal of Materials Processing Technology 209 (2009) 5475–5480. https://doi.org/10.1016/j.jmatprotec.2009.05.006.
[27] V.K. Patel, S.D. Bhole, D.L. Chen, Ultrasonic spot welded AZ31 magnesium alloy: Microstructure, texture, and lap shear strength, Materials Science and Engineering: A 569 (2013) 78–85. https://doi.org/10.1016/j.msea.2013.01.042.
[28] A. Panteli, J.D. Robson, I. Brough, P.B. Prangnell, The effect of high strain rate deformation on intermetallic reaction during ultrasonic welding aluminium to magnesium, Materials Science and Engineering: A 556 (2012) 31–42. https://doi.org/10.1016/j.msea.2012.06.055.
[29] C. Born, H. Kuckert, G. Wagner, D. Eifler, Ultrasonic Torsion Welding of Sheet Metals to Cellular Metallic Materials, Adv. Eng. Mater. 5 (2003) 779–786. https://doi.org/10.1002/adem.200310102.
[30] H. Kuckert, C. Born, G. Wagner, D. Eifler, Helium-tight Sealing of Glass with Metal by Ultrasonic Welding, Adv. Eng. Mater. 3 (2001) 903. https://doi.org/10.1002/1527-2648(200111)3:11<903:AID-ADEM903>3.0.CO;2-O.
[31] B. Harras, K.C. Cole, T. Vu-Khanh, Optimization of the Ultrasonic Welding of PEEK-Carbon Composites, Journal of Reinforced Plastics and Composites 15 (1996) 174–182. https://doi.org/10.1177/073168449601500203.
[32] U. Khan, N.Z. Khan, J. Gulati, Ultrasonic Welding of Bi-Metals: Optimizing Process Parameters for Maximum Tensile-Shear Strength and Plasticity of Welds, Procedia Engineering 173 (2017) 1447–1454. https://doi.org/10.1016/j.proeng.2016.12.210.
[33] G. Wagner, F. Balle, D. Eifler, Ultrasonic Welding of Aluminum Alloys to Fiber Reinforced Polymers, Adv. Eng. Mater. 15 (2013) 792–803. https://doi.org/10.1002/adem.201300043.
[34] K.F. Graff, Process Applications of Power Ultrasonics - A Review, in: 1974 Ultrasonics Symposium, IEEE, 11.11.1974 - 14.11.1974, pp. 628–641.
[35] D. Bakavos, P.B. Prangnell, Mechanisms of joint and microstructure formation in high power ultrasonic spot welding 6111 aluminium automotive sheet, Materials Science and Engineering: A 527 (2010) 6320–6334. https://doi.org/10.1016/j.msea.2010.06.038.
[36] M. Maeda, T. Sato, N. Inoue, D. Yagi, Y. Takahashi, Anomalous microstructure formed at the interface between copper ribbon and tin-deposited copper plate by ultrasonic bonding, Microelectronics Reliability 51 (2011) 130–136. https://doi.org/10.1016/j.microrel.2010.05.009.
[37] M. Maeda, Y. Takahashi, M. Fukuhara, X. Wang, A. Inoue, Ultrasonic bonding of Zr55Cu30Ni5Al10 metallic glass, Materials Science and Engineering: B 148 (2008) 141–144. https://doi.org/10.1016/j.mseb.2007.09.028.
[38] Y.-S. Choi, Y.-H. Yoo, J.-G. Kim, S.-H. Kim, A comparison of the corrosion resistance of Cu–Ni–stainless steel multilayers used for EMI shielding, Surface and Coatings Technology 201 (2006) 3775–3782. https://doi.org/10.1016/j.surfcoat.2006.03.040.
[39] A. Ali, A. Ahmad, K.M. Deen, Multilayer ceramic coating for impeding corrosion of sintered NdFeB magnets, Journal of Rare Earths 27 (2009) 1003–1007. https://doi.org/10.1016/S1002-0721(08)60357-9.
[40] Granta Design, CES Edupack, 2018.
[41] L. Li, A. Tirado, I.C. Nlebedim, O. Rios, B. Post, V. Kunc, R.R. Lowden, E. Lara-Curzio, R. Fredette, J. Ormerod, T.A. Lograsso, M.P. Paranthaman, Big Area Additive Manufacturing of High Performance Bonded NdFeB Magnets, Scientific reports 6 (2016) 36212. https://doi.org/10.1038/srep36212.
[42] W. Brockmann, Adhesive bonding: Materials, applications and technology, Wiley-VCH, Weinheim, 2009.
[43] S.L. Raykhere, P. Kumar, R.K. Singh, V. Parameswaran, Dynamic shear strength of adhesive joints made of metallic and composite adherents, Materials & Design 31 (2010) 2102–2109. https://doi.org/10.1016/j.matdes.2009.10.043.
[44] M. You, Y. Zheng, X.-L. Zheng, W.-J. Liu, Effect of metal as part of fillet on the tensile shear strength of adhesively bonded single lap joints, International Journal of Adhesion and Adhesives 23 (2003) 365–369. https://doi.org/10.1016/S0143-7496(03)00064-2.