1. Zhang, X., Vyatskikh, A., Gao, H., Greer, J. R. & Li, X. Lightweight, flaw-tolerant, and ultrastrong nanoarchitected carbon. Proc. Natl. Acad. Sci. 116, 6665–6672 (2019).
2. Jang, D., Meza, L. R., Greer, F. & Greer, J. R. Fabrication and deformation of three-dimensional hollow ceramic nanostructures. Nat. Mater. 12, 893–898 (2013).
3. Zheng, X. et al. Multiscale metallic metamaterials. Nat. Mater. 15, 1100–1107 (2016).
4. Xia, X. et al. Electrochemically reconfigurable architected materials. Nature 573, 205–213 (2019).
5. Pham, M.-S., Liu, C., Todd, I. & Lertthanasarn, J. Damage-tolerant architected materials inspired by crystal microstructure. Nature 565, 305 (2019).
6. Reza, R. Lucas; Zelhofer, J. Alex; Clarke, Nigel; Mateos, J. Arturo; Kochmann, M. Dennis; Greer, R. J. Resilient 3D hierarchical architected metamaterials. Proc. Natl. Acad. Sci. U. S. A. 112, (2015).
7. Chhowalla, M. et al. The chemistry of two-dimensional layered transition metal dichalcogenide nanosheets. Nat. Chem. 5, 263–275 (2013).
8. Aljarb, A. et al. Ledge-directed epitaxy of continuously self-aligned single-crystalline nanoribbons of transition metal dichalcogenides. Nat. Mater. 19, 1300–1306 (2020).
9. Jang, D. & Greer, J. R. Transition from a strong-yet-brittle to a stronger-and-ductile state by size reduction of metallic glasses. Nat. Mater. (2010). doi:10.1038/NMAT2622
10. Jin, H. et al. Black phosphorus composites with engineered interfaces for high-rate high-capacity lithium storage. Science 370, (2020).
11. Wu, H. et al. Stable cycling of double-walled silicon nanotube battery anodes through solid–electrolyte interphase control. Nat. Nanotechnol. 7, 310–315 (2012).
12. Liu, N. et al. A pomegranate-inspired nanoscale design for large-volume-change lithium battery anodes. Nat. Nanotechnol. 9, 187–92 (2014).
13. Ko, M. et al. Scalable synthesis of silicon-nanolayer-embedded graphite for high-energy lithium-ion batteries. Nat. Energy 1, 1 (2016).
14. Mo, R. et al. High-quality mesoporous graphene particles as high-energy and fast-charging anodes for lithium-ion batteries. Nat. Commun. 10, 1–10 (2019).
15. Chen, Y.-C. et al. Structurally Deformed MoS2 for Electrochemically Stable, Thermally Resistant, and Highly Efficient Hydrogen Evolution Reaction. Adv. Mater. 29, 1703863 (2017).
16. Estevez, L., Kelarakis, A., Gong, Q., Da ’as, E. H. & Giannelis, E. P. Multifunctional Graphene/Platinum/Nafion Hybrids via Ice Templating. J. Am. Chem. Soc 133, 6122–6125 (2011).
17. Naffouti, M. et al. Complex dewetting scenarios of ultrathin silicon films for large-scale nanoarchitectures. Sci. Adv. 3, eaao1472 (2017).
18. Becker, J. et al. Complex dewetting scenarios captured by thin-film models. Nat. Mater. 2, 59–63 (2003).
19. Hu, G. et al. A general ink formulation of 2D crystals for wafer-scale inkjet printing. Sci. Adv 6, (2020).
20. Guo, Y. et al. Additive manufacturing of patterned 2D semiconductor through recyclable masked growth. Proc. Natl. Acad. Sci. 116, 3437–3442 (2019).
21. Liu, F. et al. Disassembling 2D van der Waals crystals into macroscopic monolayers and reassembling into artificial lattices. Science (80). 367, 903–906 (2020).
22. Meza, L. R., Das, S. & Greer, J. R. Strong, lightweight, and recoverable three-dimensional ceramic nanolattices. Science (80). 345, 1322–1326 (2014).
23. Hyun Chae, W., Cain, J. D., Hanson, E. D., Murthy, A. A. & Dravid, V. P. Substrate-induced strain and charge doping in CVD-grown monolayer MoS 2. Appl. Phys. Lett 111, 143106 (2017).
24. Hao, J. et al. Strain-engineered two-dimensional MoS2 as anode material for performance enhancement of Li/Na-ion batteries. Sci. Rep. 8, 1–9 (2018).
25. Li, W., Yang, Y., Zhang, G. & Zhang, Y. W. Ultrafast and directional diffusion of lithium in phosphorene for high-performance lithium-ion battery. Nano Lett. 15, 1691–1697 (2015).
26. Janski, R. et al. Lithium barrier materials for on-chip Si-based microbatteries. J. Mater. Sci. Mater. Electron. 28, 14605–14614 (2017).
27. Sun, X., Wang, Z. & Fu, Y. Q. Defect-Mediated Lithium Adsorption and Diffusion on Monolayer Molybdenum Disulfide. Sci. Rep. 5, 1–9 (2015).
28. Qaiser, N., Jae Kim, Y., Su Hong, C. & Min Han, S. Numerical Modeling of Fracture-Resistant Sn Micropillars as Anode for Lithium Ion Batteries. J. Phys. Chem. C 120, (2016).
29. Bertolazzi, S., Brivio, J. & Kis, A. Stretching and Breaking of Ultrathin MoS 2. ACS Nano 5, 9703–9709 (2011).
30. Cook, J. B. et al. Mesoporous MoS2 as a Transition Metal Dichalcogenide Exhibiting Pseudocapacitive Li and Na-Ion Charge Storage. Adv. Energy Mater. 6, 1–12 (2016).
31. Zhang, L. et al. Electrochemical Reaction Mechanism of the MoS 2 Electrode in a Lithium-Ion Cell Revealed by in Situ and Operando X-ray Absorption Spectroscopy. Nano Lett. 18, 1466–1475 (2018).
32. Quilty, C. D. et al. Ex Situ and Operando XRD and XAS Analysis of MoS 2 : A Lithiation Study of Bulk and Nanosheet Materials. ACS Appl. Energy Mater. 2, 7635–7646 (2019).
33. Zhu, Z. et al. Unraveling the Formation of Amorphous MoS2 Nanograins during the Electrochemical Delithiation Process. Adv. Funct. Mater. 29, 1–8 (2019).
34. Shao, Y. et al. 3D Crumpled Ultrathin 1T MoS 2 for Inkjet Printing of Mg-Ion Asymmetric Micro-supercapacitors. ACS Nano 14, 7308–7316 (2020).
35. Cai, Y. et al. Mixed-dimensional MXene-hydrogel heterostructures for electronic skin sensors with ultrabroad working range. Sci. Adv 6, (2020).
36. Shen, P. C. et al. Ultralow contact resistance between semimetal and monolayer semiconductors. Nature 593, 211–217 (2021).
37. Kang, K. et al. Layer-by-layer assembly of two-dimensional materials into wafer-scale heterostructures. Nat. Publ. Gr. 550, 229 (2017).
38. Acerce, M., Voiry, D. & Chhowalla, M. Metallic 1T phase MoS2 nanosheets as supercapacitor electrode materials. Nat. Nanotechnol. 10, 313–8 (2015).
39. Voiry, D. et al. The role of electronic coupling between substrate and 2D MoS2 nanosheets in electrocatalytic production of hydrogen. Nat. Mater. 15, 1003 (2016).
40. Kibsgaard, J., Chen, Z., Reinecke, B. N. & Jaramillo, T. F. Engineering the surface structure of MoS 2 to preferentially expose active edge sites for electrocatalysis. Nat. Mater. 11, 963–969 (2012).