[1] Katz RN. Applications of Silicon Nitride Based Ceramics in the U.S. Mat. Res. Soc. Symp. Proc 1997, 287: 197-208.
[2] Riley FL. Silicon Nitride and Related Materials. J. Am. Ceram. Soc 2000, 83: 245-265.
[3] Okada A. Automotive and industrial applications of structural ceramics in Japan. J. Eur. Ceram. Soc. 2008, 28: 1097-1104.
[4] Xiang H, Feng Z, Li Z, et al. Theoretical predicted high-thermal-conductivity cubic Si3N4 and Ge3N4: promising substrate materials for high-power electronic devices. Scientific reports 2018, 8: 14374.
[5] Hu F, Xie ZP, Zhang J, et al. Promising high-thermal-conductivity substrate material for high-power electronic device: silicon nitride ceramics. Rare Metals 2020, 39: 463-478.
[6] Kitayama M, Hirao K, Toriyama M, et al. Modeling and simulation of grain growth in Si3N4 - anisotropic Ostwald ripening. Acta Mater. 1998, 46: 6541-6550.
[7] Hirosaki N, Ogata S, Kocer C, et al. Molecular dynamics calculation of the ideal thermal conductivity of single-crystal α- and β-Si3N4. Phys. Rev. B 2002, 65: 1-11.
[8] Kusano D, Noda Y, Shibasaki H, et al. Effects of Impurity Iron Content on Characteristics of Sintered Reaction-Bonded Silicon Nitride. Int. J. Appl. Ceram. Tec. 2013, 10: 690-700.
[9] Kusano D, Hyuga H, Zhou Y, et al. Effect of Aluminum Content on Mechanical Properties and Thermal Conductivities of Sintered Reaction-Bonded Silicon Nitride. Int. J. Appl. Ceram. Tec. 2014, 11: 534-542.
[10] Lee HM, Lee EB, Kim DL, et al. Comparative study of oxide and non-oxide additives in high thermal conductive and high strength Si3N4 ceramics. Ceram. Int. 2016, 42: 17466-17471.
[11] Hu F, Zhu TB, Xie ZP, et al. Elimination of grain boundaries and its effect on the properties of silicon nitride ceramics. Ceram. Int. 2020, 46: 12606-12612.
[12] Wang WD, Yao DX, Liang HQ, et al. Novel silicothermic reduction method to obtain Si3N4 ceramics with enhanced thermal conductivity and fracture toughness. J. Eur. Ceram. Soc. 2020, 41: 1735-1738.
[13] Hirao K, Tsuge A, Toriyama M, et al. Oxygen Content in β-Si3N4 Crystal Lattice. J. Am. Ceram. Soc 1999, 82: 3263-3265.
[14] Kitayama M, Hirao K, Tsuge A, et al. Thermal Conductivity of β-Si3N4: II, Effect of Lattice Oxygen. J. Am. Ceram. Soc 2000, 83: 1985-1992.
[15] Zhou Y, Hyuga H, Kusano D, et al. A tough silicon nitride ceramic with high thermal conductivity. Adv. Mater. 2011, 23: 4563-4567.
[16] Li YS, Kim H-N, Wu HB, et al. Enhanced thermal conductivity in Si3N4 ceramic by addition of a small amount of carbon. J. Eur. Ceram. Soc. 2019, 39: 157-164.
[17] Itoh T. Preparation of pure α-silicon nitride from silicon powder. J. Mater. Sci. Lett. 1990, 9: 19-20.
[18] Jin X, Xing PF, Zhuang YX, et al. Effect of Si3N4 diluent on direct nitridation of silicon powder. Ceram. Int. 2019, 45: 10943-10950.
[19] Mazdiyasni KS, Cooke CM. Synthesis, Characterization, and Consolidation of Si3N4 Obtained from Ammonolysis of SiCl4. J. Am. Ceram. Soc. 1973, 56: 628-633.
[20] Yamada T, Kawahito T, Iwai T. Crystallization of amorphous Si3N4 prepared by the thermal decomposition of Si(NH)2. J. Mater. Sci. Lett. 1983, 2: 275-278.
[21] Chung YK, Koo JH, Kim SA, et al. Optimization of reaction parameters for synthesis of amorphous silicon nitride powder by vapor phase reaction. Ceram. Int. 2014, 40: 14563-14568.
[22] Komeya K, Inoue H. Synthesis of the α form of silicon nitride from silica. J. Mater. Sci. Lett. 1975, 7: 1243-1246.
[23] Zhang S-C, Cannon WR. Preparation of Silicon Nitride from Silica. J. Am. Ceram. Soc 1984, 67: 691-695.
[24] Dijien FKv, Vogt U. The chemistry of the carbothermal synthesis of α-Si3N4: Reaction mechanism, reaction rate and properties of the product. J. Eur. Ceram. Soc. 1992, 10: 273-282.
[25] Koc R, Kaza S. Synthesis of α-S3N4 from Carbon Coated Silica by Carbothermal Reduction and Nitridation. J. Eur. Ceram. Soc. 1998, 18: 1471-1477.
[26] Li B, Feng YY, Li GQ, et al. Preparation of high-purity α-Si3N4 nano-powder by precursor-carbothermal reduction and nitridation. Ceram. Int. 2019, 45: 6335-6339.
[27] Kang I-H, Komeya K, Meguro T, et al. Preparation of Si3N4 Powder from the System SiO2-C-N2 with Si3N4 Seed. J. Ceram. Soc. Jpn. 1998, 106: 30-34.
[28] Wang YL, Wu HY, Jia BR, et al. Synthesis of monodisperse and high-purity α-Si3N4 powder by carbothermal reduction and nitridation. Adv. Powder Technol. 2021.
[29] Liu W, Tong WX, He RX, et al. Effect of the Y2O3 additive concentration on the properties of a silicon nitride ceramic substrate. Ceram. Int. 2016, 42: 18641-18647.
[30] Go S-I, Li YS, Ko J-W, et al. Microstructure and Thermal Conductivity of Sintered Reaction-Bonded Silicon Nitride: The Particle Size Effects of MgO Additive. Adv. Mater. Sci. Eng. 2018, 2018: 1-5.
[31] Zhou Y, Hyuga H, Kusano D, et al. Effects of yttria and magnesia on densification and thermal conductivity of sintered reaction-bonded silicon nitrides. J. Am. Ceram. Soc 2019, 102: 1579-1588.
[32] Lange FF. Phase Relations in the System Si3N4-SiO2-MgO and Their Interrelation with Strength and Oxidation. J. Am. Ceram. Soc 1977, 61: 53-56.
[33] Negita K. Ionic Radii and Electronegativities of Effective Sintering Aids for Si3N4 Ceramics. J. Mater. Sci. Lett. 1985, 4: 417-418.
[34] Kitayama M, Hirao K, Watari K, et al. Thermal Conductivity of β-Si3N4 : III, Effect of Rare-Earth (RE=La,Nd,Gd,Y,Yb,and Sc) Oxide Additives. J. Am. Ceram. Soc 2001, 84: 353-358.
[35] Hirao K, Watari K, Brito ME, et al. High Thermal Conductivity in Silicon Nitride with Anisotropie Microstructure. J. Am. Ceram. Soc 1996, 79.
[36] Kitayama M, Hirao K, Toriyama M, et al. Thermal Conductivity of β-Si3N4: I, Effects of Various Microstructural Factors. J. Am. Ceram. Soc 1999, 82: 3105-3112.
[37] Zhu XW, Suzuki TS, Uchikoshi T, et al. Texture Development in Si3N4 Ceramics by Magnetic Field Alignment during Slip Casting. J. Ceram. Soc. Jpn. 2006, 114: 979-987.
[38] Zhu XW, Suzuki TS, Uchikoshi T, et al. Texturing behavior in sintered reaction-bonded silicon nitride via strong magnetic field alignment. J. Eur. Ceram. Soc. 2008, 28: 929-934.
[39] Zhu XW, Sakka Y, Suzuki TS, et al. The c-axis texturing of seeded Si3N4 with β-Si3N4 whiskers by slip casting in a rotating magnetic field. Acta Mater. 2010, 58: 146-161.
[40] Zhu XW, Sakka Y, Zhou Y, et al. A strategy for fabricating textured silicon nitride with enhanced thermal conductivity. J. Eur. Ceram. Soc. 2014, 34: 2585-2589.
[41] Wang ZH, Bai B, Ning XS. Effect of rare earth additives on properties of silicon nitride ceramics. Advances in Applied Ceramics 2014, 113: 173-177.
[42] Liu W, Tong WX, Lu XX, et al. Effects of different types of rare earth oxide additives on the properties of silicon nitride ceramic substrates. Ceram. Int. 2019, 45: 12436-12442.
[43] Wang WD, Yao DX, Liang HQ, et al. Effect of in-situ formed Y2O3 by metal hydride reduction reaction on thermal conductivity of β-Si3N4 ceramics. J. Eur. Ceram. Soc. 2020, 40: 5316-5323.
[44] Karakuş N, Osman Kurt A, Duran C, et al. Sintering behaviour of silicon nitride powders produced by carbothermal reduction and nitridation. Adv. Powder Technol. 2013, 24: 697-702.
[45] Dong H, Zhao Z, Wang C. Effect of powder characteristics on the thermal conductivity and mechanical properties of Si3N4 ceramics sintered by Spark plasma sintering. Journal of Materials Science: Materials in Electronics 2019, 30: 7590-7599.
[46] Wasanapiarnpong T, Wada S, Imai M, et al. Effect of post-sintering heat-treatment on thermal and mechanical properties of Si3N4 ceramics sintered with different additives. J. Eur. Ceram. Soc. 2006, 26: 3467-3475.
[47] Yokota H, Abe H, Ibukiyama M. Effect of lattice defects on the thermal conductivity of β-Si3N4. J. Eur. Ceram. Soc. 2003, 23: 1751-1759.
[48] Thompson D. Tough cookery. Nature 1997, 389: 675-676.
[49] Pablos AD, Bermudo J, Osendi MI. Microstructure and Mechanical Properties of Silicon Nitride Materials Fabricated from SHS Powders. J. Am. Ceram. Soc. 2001, 84: 1033-1036.