1. Choudhury M R, Srinivas M S, Debnath K (2018) Experimental investigations on drilling of lignocellulosic fiber reinforced composite laminates. J Manuf Process 34:51-61
2. Zhu Z, Guo K, Sun J, Li J, Liu Y, Zheng Y, Chen L (2018) Evaluation of novel tool geometries in dry drilling aluminium 2024-T351/titanium Ti6Al4V stack. J Mater Process Tech 259:270-281
3. Wang X, Shen X, Zeng C, Sun F (2018) Combined influences of tool shape and as-deposited diamond film on cutting performance of drills for CFRP machining. Surf Coat Tech 347:390-397
4. Loja M A R, Alves M S F, Bragança I M F, Rosa R S B, Barbosa I C J, Barbosa J I (2018) An assessment of thermally influenced and delamination-induced regions by composites drilling. Compos Struct 202:413-423
5. Xu J, Li C, Mi S, An Q, Chen M (2018) Study of drilling-induced defects for CFRP composites using new criteria. Compos Struct 201:1076-1087
6. Deng H, Xu Z (2019) Dressing methods of superabrasive grinding wheels: A review. J Manuf Process 45:46–69
7. Alessandro A, Khamis E (2019) 3D micro-mechanical modelling of orthogonal cutting of UD-CFRP using smoothed particle hydrodynamics and finite element methods. Compos Struct 218:174-193
8. Alessandro A, Sein L S, Khamis E (2017) Modelling the orthogonal cutting of UN-CFRP composites: Development of a novel cohesive zone model. Compos Struct 168:65-83
9. Su Y L (2019) Effect of the cutting speed on the cutting mechanism in machining CFRP. Compos Struct 220:662-676
10 Meng Q X, Cai J Cheng H, Zhang K F (2020) Investigation of CFRP cutting mechanism variation and the induced effects on cutting response and damage distribution. Int J Adv Manuf Technol 106:2893-2907
11 Cepero-mejias F, Curiel-sosa J L, Zhang C, Phadnis V A (2019) Effect of cutter geometry on machining induced damage in orthogonal cutting of UD polymer composites: FE study. Compos Struct 214: 439-450
12 Li H N, Wang J P, Wu C Q, Zhao Y J, Xu J, Liu X L, Zhu W Q (2020) Damage behaviors of unidirectional CFRP in orthogonal cutting: A comparison between single- and multiple-pass strategies. Compos part B 185: 1-13
13 Liu H T, Lin J, Sun Y Z, Zhang J Y (2019) Micro model of carbon fiber/cyanate ester composites and analysis of machining damage mechanism. Chin J Mech Eng 32, 52:1-11
14 Cheng H, Gao J Y, Kafka O L, Zhang K F, Luo B, Liu W K (2017) A micro-scale cutting model for UD CFRP composites with thermo-mechanical coupling. Compos Sci Tech 153: 18-31
15 Kisshore D, Inderdeep S (2017) Low-frequency modulation-assisted drilling of carbon-epoxy composite laminates. J Manuf Process 25: 262-273
16 Voss R, Seeholzer L, Kuster F, Wegener K (2017) Influence of fiber orientation, tool geometry and process parameters on surface quality in milling of CFRP. CIRP J Manuf Sci Tech 18: 75-91
17 Hintze W, Hartmann D, Schutte C (2011) Occurrence and propagation of delamination during the machining of carbon fiber reinforced plastics (CFRPs) – An experimental study. Compos Sci Tech 71: 1719-1725
18 Hintze W, Brugmann F (2018) Influence of spatial tool inclination on delamination when milling CFRP. J Mater Process Tech 252:830-837
19 He Y L, Qing H A, Zhang S G, Wang D Z, Zhu S W (2017) The cutting force and defect analysis in milling of carbon fiber-reinforced polymer (CFRP) composite. Int J Adv Manuf Tech 93: 1829-1842
20 Hintze W, Cordes M, Koerkel G (2015) Influence of weave structure on delamination when milling CFRP. J Mater Process Tech 216: 199-205
21 Ghafarizadeh S, Chatelain J F, Lebrun G (2016) Finite element analysis of surface milling of carbon fiber-reinforced composites. Int J Adv Manuf Tech 87: 399-409
22 Li M J, Huang M J, Jiang X G, Kuo C L, Yang X J (2018) Study on burr occurrence and surface integrity during slot milling of multidirectional and plain woven CFRPs. Int J Adv Manuf Tech 97: 163-173
23 Wang D N, Li J L, Jiao Y N (2013) 3D meso-geometrical model of plain weave fabric and finite element modeling under ballistic impact. J Mater Eng 9: 69-78