[1] Akshay Kumar Ravirala, Leela Koteswari Bethapudi, Jeevani Kommareddy, Bhanu Sai Thommandru, Sateesh Jasti, Prakash Raju Gorantla, Ashok Puli, Girija Sravani Karumuri, Srinivasa Rao Karumuri, ―Design and performance analysis of uniform meander structured RF MEMS capacitive shunt switch along with perforations, Microsystem Technologies, Volume 24, Issue 2, pp 901–908, DOI: 10.1007/s00542-017-3403-z, Feb. 2018.
[2] P. Ashok Kumar, K. Girija Sravani, B. V. S. Sailaja, K. V. Vineetha, Koushik Guha, K. Srinivasa Rao, ―Performance analysis of series: shunt configuration based RF MEMS switch for satellite communication applications‖, Microsystem Technologies, Volume 24, Issue 12, pp 4909–4920, to be published, Dec. 2018, DOI: 10.1007/s00542-018-3907-1.
[3] K. Srinivasa Rao, P. Ashok Kumar, Koushik Guha, B. V. S. Sailaja, K. V. Vineetha, K. L. Baishnab, K. Girija Sravani, ―Design and simulation of fixed–fixed flexure type RF MEMS switch for reconfigurable antenna‖, Microsystem Technologies, to be published, https://doi.org/10.1007/s00542-018-3983-2.
[4] K. Girija Sravani, Koushik Guha, K Srinivasa Rao, Ameen Elsinawi, ―Design of a novel structure capacitive RF MEMS switch to improve performance parameters, IET Circuits, Devices & Systems. 2019 Jul 12;13(7):1093-101.
[5] Girija Sravani, K., Koushik Guha, and K. Srinivasa Rao. "A modified proposed capacitance model for step structure capacitive RF MEMS switch by incorporating fringing field effects." International Journal of Electronics (2020): 1-22.
[6] Karumuri Srinivasa Rao, Thalluri Lakshmi Narayana, Koushik Guha & Sravani, Girija. (2018). Fabrication and Characterization of Capacitive RF MEMS Perforated Switch. IEEE Access. PP. 1-1. DOI:10.1109/ACCESS.2018.2883353.
[7] Thalluri, Lakshmi Narayana & Guha, Koushik & Karumuri, Srinivasa Rao & Prasad, G. & Sravani, Girija & Sastry, K. & Kanakala, Appala & Babu, P.. (2020). Perforated serpentine membrane with AlN as dielectric material shunt capacitive RF MEMS switch fabrication and characterization. Microsystem Technologies. 10.1007/s00542-020-04755-3.
[8] Sravani, K. Girija, D. Prathyusha, K. Srinivasa Rao, P. Ashok Kumar, G. Sai Lakshmi, Ch Gopi Chand, P. Naveena, Lakshmi Narayana Thalluri, and Koushik Guha. "Design and Performance Analysis of Low Pull-In Voltage of Dimple Type Capacitive RF MEMS Shunt Switch for Ka- Band." IEEE Access 7 (2019): 44471-44488.
[9] Vijaya Prasad K., Kishore P.V.V., Srinivasa Rao O. (2019), Skeleton based viewinvariant human action recognition using convolutional neural networks‘, Interna-tional Journal of Recent Technology and Engineering, 8(2), PP.4860-4867
[10] Maity R., Maity N.P., Srinivasa Rao K., Guha K., Baishya S. ( 2018) , ‗A newcompact analytical model of nanoelectromechanical systems-based capacitive micromachined ultrasonic transducers for pulse echo imaging‘,Journal of Computa-tional Electronics, 17 (3),PP. 1334- 1342
[11] Aditya M, I Veeraraghava Rao, B. Balaji, John Philip B, Ajay Nagendra N, S Vamsee Krishna.” A Novel Low-Power 5th order Analog to Digital Converter for Biomedical Applications.” IJITEE, ISSN: 2278-3075, Volume-8 Issue-7,PP: 217-220,May, 2019
[12] B. Balaji, M. Aditya, G. Adithya, M. Sai Priyanka, V. V. S. S. K. Ayyappa Vijay, K. Chandu. “Implementation of Low-Power 1-Bit Hybrid Full adder with Reduced Area.” IJITEE, ISSN: 2278-3075, Volume-8 Issue-7,PP:61-64, May, 2019.
[13] B.Balaji, N Ajaynagendra, Erigela Radhamma, A Krishna Murthy, M Lakshmana Kumar.”Design of Efficient 16 Bit Crc with Optimized Power and Area in Vlsi Circuits.”IJITEE, ISSN: 2278-3075, Volume-8 Issue-8, PP: 87-91 June, 2019
[14] Naraiah, R., Balaji, B., Radhamma, E., Udutha, R.”Delay Approximation Model for Prime Speed Interconnects in Current Mode.” IJITEE, ISSN: 2278-3075, Volume-8. Issue-9, PP: 3090-3093, July 2019
[15] P.Ashok Kumar, K. Srinivasa Rao,K. Girija Sravani,B.Balaji,M. Aditya,KoushikGuha,Ameen Elsinawi.” An Intensive Approach to Optimize Capacitive type RF MEMS Shunt Switch.” DOI: 10.1016/j.mejo.2021.105050 Microelectronics Journal ,2021 ,pp. 105050
[16] Sudhakar Alluri,K. Mounika,B.Balaji. , D.Mamatha,” A Novel Implementation of 4 Bit Parity Generator in 7nm Technology” ISSN: 0094-243X, Volume-2358 Issue-1 July, 2021,PP: 030002- 1-10 , https://doi.org/10.1063/5.0059329
[17].Sudhakar Alluri,B.Balaji,Ch.cury” Low power, high speed VLSI circuits in 16nm technology” ISSN: 0094-243X, Volume-2358 Issue-1 July, 2021,PP: 030001- 1-16 , https://doi.org/10.1063/5.0060101
[18] Sravani, K.G., Guha, K., Aditya, M. et al. “Design, simulation and analysis of uniform and non-uniform serpentine step structure RF MEMS switch”. Microsystem Technol (2021). https://doi.org/10.1007/s00542-021-05216-1
[19]Kumar, P.A., Rao, K.S., Balaji, B. et al. “Low Pull-in-Voltage RF-MEMS Shunt Switch for 5G Millimeter Wave Applications”. Trans. Electr. Electron. Mater. (2021). https://doi.org/10.1007/s42341-021-00304-5
[20] Sudhakar Alluri,K. Mounika,B.Balaji. , D.Mamatha,” Optimization of multiplexer architecture in VLSI circuits” ISSN: 0094-243X, Volume-2358 Issue-1 July, 2021,PP: 040004- 1-19 , https://doi.org/10.1063/5.0059332
[21] Aditya, M., Rao, K.S., Sravani, K.G. et al. Simulation and Drain Current Performance analysis of High-K Gate Dielectric FinFET. Silicon (2021). https://doi.org/10.1007/s12633-021-01176-3
[22] Aditya, M., Rao, K.S. Design and Performance Analysis of Advanced MOSFET Structures. Trans. Electr. Electron. Mater. (2021). https://doi.org/10.1007/s42341-021-00338-9
[23] Aditya, M., Srinivasa Rao, K., Sravani, K., Guha, K. (2021). 'Design, simulation and analysis of high-K gate dielectric FinField effect transistor', International Journal of Nano Dimension, 12(3), pp. 305-309. doi: 10.22034/ijnd.2021.681554